What did you do to your Tremor today?

I got them off Ebay and I just cleaned the surface real good with alcohol and then tried my best to stick them on straight..lol really easy. These are hard 3D and I really like them. I'll find the link for them on ebay and try and post it on here.
 
Some pics of the cab light lit up.
20200413_044612.jpg
20200413_044627.jpg
 
I did the letters on my hood and glovebox as well. The company I used was tufskinz. If you search there is usually a code for a 10% discount. I did matte black, but they have many colors and are licensed by Ford.

That looks sharp. Ford should do that from the factory.
 
Added 1.5" springs to the front and changed out my rear block for a 2.5". Finally going to leave it alone now. Suspension wise.
View attachment 1489
Looks perfect man! Do you have a link where you got the springs and blocks?
 
How hard was it to replace cab lights?
It wasn't very hard at all. Take the torx screw out which I believe was a 20 Torx. The be careful and get a skinny/small flat top and run it under the light on the back going forward with the screwdriver and you'll feel a little clip, push that in with the screwdriver and lift up on the back of the light at the same time and they'll come right out. It won't feel like the will because of the seal that's glued to the light and roof but they will. Installed the new ones with plenty of clear silicone.
20200413_161807.jpg
 
More info on both please? Those look awesome!
I've got the cup holder inserts as well. simple but cool. There was a post on these somewhere around here before. Search for it and you'll find the link in the thread. The guy has an etsy shop but i don't remember the name
 
It wasn't very hard at all. Take the torx screw out which I believe was a 20 Torx. The be careful and get a skinny/small flat top and run it under the light on the back going forward with the screwdriver and you'll feel a little clip, push that in with the screwdriver and lift up on the back of the light at the same time and they'll come right out. It won't feel like the will because of the seal that's glued to the light and roof but they will. Installed the new ones with plenty of clear silicone.View attachment 1490
And you'll destroy then stock seal but if you ever need to put them back on just clean all the old off and install a new one shouldn't be to bad. I don't ever imagine going back to stock. These are bright! Love em..
 
I've got the cup holder inserts as well. simple but cool. There was a post on these somewhere around here before. Search for it and you'll find the link in the thread. The guy has an etsy shop but i don't remember the name
Ok thank you
 
And you'll destroy then stock seal but if you ever need to put them back on just clean all the old off and install a new one shouldn't be to bad. I don't ever imagine going back to stock. These are bright! Love em..

Awesome, I looked at these back when I ordered my truck last year. I watched an install video and they had to take off visors, headliner and a crap ton of other stuff. I hadn’t looked at them since lol. I’m assuming since the new trucks are already LED that whole process is eliminated. Now I have to spend some more money.
Thanks for the feedback!!
 
Looks perfect man! Do you have a link where you got the springs and blocks?

Sure. I tried 3 different combos this looks the best and gives me a 1-1/8" rake. Sucks being a new model with no info but i hope this helps others.

Springs: https://www.roughcountry.com/ford-leveling-lift-kit-9285.html?rrec=true It says not for Tremors, but when i called they said it would just not give me the full 1.5", which it didn't it gave me just over an inch. But they are progressive rate and ride smooth.

Track bar: https://www.readylift.com/track-bar-for-0-0-5-0-of.html Here is the track bar i got. It's heavy duty and can be adjusted while on the truck. My axle was shifted to the drivers side by a 1/2", this will straighten that back out.

Rear spacers: http://www.pmfsuspension.com/2017-20-Ford-Superduty-Fabricated-Blocks_p_173.html I got the 2.5* with the bumpstop tangs.
 
Awesome, I looked at these back when I ordered my truck last year. I watched an install video and they had to take off visors, headliner and a crap ton of other stuff. I hadn’t looked at them since lol. I’m assuming since the new trucks are already LED that whole process is eliminated. Now I have to spend some more money.
Thanks for the feedback!!
Now do you already have cab lights? If you don't already have them the process is 1000× harder and I wouldn't tackle that myself. If you have cab lights easy.
 
Sure. I tried 3 different combos this looks the best and gives me a 1-1/8" rake. Sucks being a new model with no info but i hope this helps others.

Springs: https://www.roughcountry.com/ford-leveling-lift-kit-9285.html?rrec=true It says not for Tremors, but when i called they said it would just not give me the full 1.5", which it didn't it gave me just over an inch. But they are progressive rate and ride smooth.

Track bar: https://www.readylift.com/track-bar-for-0-0-5-0-of.html Here is the track bar i got. It's heavy duty and can be adjusted while on the truck. My axle was shifted to the drivers side by a 1/2", this will straighten that back out.

Rear spacers: http://www.pmfsuspension.com/2017-20-Ford-Superduty-Fabricated-Blocks_p_173.html I got the 2.5* with the bumpstop tangs.
Thanks man!
 

Latest Discussions

Back
Top