Exactly! Maybe I need to get these:Aren't they for 007 mods. You know, Smoke Screen, Oil Slick, Ejector seat, Front Machine Gun, rear Machine Gun, Now what was #6?
Nope. You could remove your front drive shaft. or leave your hubs unlocked and remove the vacuum line that actuates the hubs. then you'd be in 2lo when you switch the knob to 4loOh, there's also a "simple" mod you can do to tie a switch to enable a "2LO" drive mode.
Nope. You could remove your front drive shaft. or leave your hubs unlocked and remove the vacuum line that actuates the hubs. then you'd be in 2lo when you switch the knob to 4lo
Interesting. Never knew about that. Cool idea. thanks for the linkThe mod I'm referencing uses a relay to intercept the vacuum hub solenoid. Did you try this and it didn't work? I haven't set it up yet, but it's in my to-do pile.
I did this mod on my previous SDs and will do on my new Tremor after I pick it up as it just landed yesterday. This is a must mod if you ever need to put a trailer or a boat in a tight area without axle bind on the front, It basically puts the hubs in Free mode after you switch in to 4WD low...www.fordtremor.com
use them for whatever you want or nothing at all. not all hooked up yet but this is my layout
1. front led light bar
2. rear led back up lights
3. puddle lights
4. air compressor
5. cellular signal booster
6. ham radio
We live in Montana and cellular coverage falls off when you're outside the larger cities. That and we're surrounded by mountains. Signal boosters help amplify signal.cellular signal booster? any details on that? Sounds like an interesting concept.