UPDATE: BD 40" OnX6 Arc on a Tremor installed!

DurhamTremor

Tremor Buff
Joined
Nov 24, 2021
Messages
98
Reaction Points
137
Location
ON, Canada
Current Ride
2020 F150 XLT Sport 5.0 FWD
Has anyone mounted a BD 40" OnX6 Arc on their Tremor? (Front Bumper)
If so,
1) Did you use the BD mounts provided?
2) Did you have to cut out any of the front grill?

I'm looking to do this on my 2022 F250 Lariat Tremor.
 

BroncoHooves

Center Console Unbolter
Tremor R&D 🧰
Joined
Jun 9, 2021
Messages
4,970
Reaction Points
12,846
Location
Austin, TX
Military
Former USAF
Current Ride
'22 F350 6.7L Lariat
I’m mounting a 30” onx6 on mine soon, behind the grille though!
 

idrivea2022tremor

Founding Member
Joined
Oct 29, 2021
Messages
444
Reaction Points
732
Location
San Diego
Current Ride
2022 F250 Tremor 7.3, 2002 VW Golf, 2001 Audi TT, 1991 Avanti, 1961 CJ5, 1993 Wrangler Sahara, 1988 Samurai
Following to see the results. I know the 30s fit nicely above the plastic piece. Curious what the 40s look like.
 

Motoxxx43

Founding Member
Joined
Nov 9, 2021
Messages
109
Reaction Points
150
Location
Colorado
Rough Country single row, 40" curved bar. Brackets on the Carbonized Gray were not powder coated at time of photo.
IMG_20221104_085229_035.jpg
Snapchat-837650141.jpg
Snapchat-1540158470.jpg
Snapchat-1409719814.jpg
 

Motoxxx43

Founding Member
Joined
Nov 9, 2021
Messages
109
Reaction Points
150
Location
Colorado
Those are buddies trucks. I have yet to put mine on. I'm leaning towards behind the grill for security reasons but that 40" looks great and it works great too.

I'll have a batch of those brackets done from powder coat soon.
 

Supercup

Founding Member
Joined
Jul 5, 2021
Messages
774
Reaction Points
1,931
Location
S. Cal
Current Ride
2022 6.7 F-350 Tremor
@BLACKCHERRY and I both have 40" Onxy 6 40" on our front bumper - I have an Arc, he has a straight. I got the dual control Arc with half clear and half amber - run off two seperate upfitters - BD makes a wire harness that plugs into the light, then to upfitter - litterly 1 plug at light and 3 wires at battery for pos, ground and upfitter switch - all you need and that BD harness is only $20. Light works great and slides back nicely up under the grill -

My brackets were custom fabbed and @BLACKCHERRY got his from KD Fabworks - who is making them now. Nice option as it does not block the front camera like the link lights do.

See Post 193 Link: https://www.fordtremor.com/threads/project-black-cherry.5826/page-10

See Post 64 Link: https://www.fordtremor.com/threads/supercup-build.5850/page-4
 
Last edited:

Supercup

Founding Member
Joined
Jul 5, 2021
Messages
774
Reaction Points
1,931
Location
S. Cal
Current Ride
2022 6.7 F-350 Tremor
Has anyone mounted a BD 40" OnX6 Arc on their Tremor? (Front Bumper)
If so,
1) Did you use the BD mounts provided?
2) Did you have to cut out any of the front grill?

I'm looking to do this on my 2022 F250 Lariat Tremor.
No front grill cutting required - used custom fabbed brackets or you can get some from KD Fabworks.
 

sevo

Tremor Member
Joined
Dec 4, 2021
Messages
20
Reaction Points
43
Location
PNW
I installed mine a couple weeks ago. Got the KDF brackets and some custom mounting bolts separately. The light is TIGHT against the lower grille fascia on the Platinum which I don’t love. But overall killer light bar!
 
OP
OP
DurhamTremor

DurhamTremor

Tremor Buff
Joined
Nov 24, 2021
Messages
98
Reaction Points
137
Location
ON, Canada
Current Ride
2020 F150 XLT Sport 5.0 FWD
No front grill cutting required - used custom fabbed brackets or you can get some from KD Fabworks.
Thank you for the information. I may wait until spring for warmer weather to install.
Are the KD Fabworks brackets on their site?
 

Vecman

Founding Member
Joined
Jul 25, 2021
Messages
1,245
Reaction Points
2,694
Location
Queen Creek, AZ
Current Ride
2022 F-350 Platinum Tremor
Current Ride #2
2021 Ranger Tremor
I’m mounting a 30” onx6 on mine soon, behind the grille though!
I've been trying to work out how to do this also, but was looking at 2 10" ones, one on each side. Just haven't pulled the grill off again lately to relook at things. The platinum grill is different than lariat, and I've found I can't mount things outside the same way other guys are. Would love to see what you have planned for this, and if it would work on my grill. Love the idea of the stealth hiding lights
 

cntyguy

Founding Member
Joined
Oct 22, 2021
Messages
545
Reaction Points
897
Location
Camarillo, CA
Current Ride
2022 7.3 rapid red lariat tremor
Current Ride #2
Tahoe Z71
First Responder
Ret.
I've been trying to work out how to do this also, but was looking at 2 10" ones, one on each side. Just haven't pulled the grill off again lately to relook at things. The platinum grill is different than lariat, and I've found I can't mount things outside the same way other guys are. Would love to see what you have planned for this, and if it would work on my grill. Love the idea of the stealth hiding lights
Just need to change out that platty grill for a lariat grill!😂
 

HTremor

Founding Member
Joined
Oct 13, 2021
Messages
204
Reaction Points
362
Location
San Diego
Current Ride
2022 F250 Tremor 7.3L
OP
OP
DurhamTremor

DurhamTremor

Tremor Buff
Joined
Nov 24, 2021
Messages
98
Reaction Points
137
Location
ON, Canada
Current Ride
2020 F150 XLT Sport 5.0 FWD
Were those wired straught to the upfitter. At 200 watts, it could just be handled by switch 5 or 6 with now relays needed, right?
I wired it to upfitter switch 5 directly.
 

Vecman

Founding Member
Joined
Jul 25, 2021
Messages
1,245
Reaction Points
2,694
Location
Queen Creek, AZ
Current Ride
2022 F-350 Platinum Tremor
Current Ride #2
2021 Ranger Tremor
Were those wired straught to the upfitter. At 200 watts, it could just be handled by switch 5 or 6 with now relays needed, right?
Just FYI, any of the upfitter switches could handle 200 watts
 

Nick@ApolloOptics

FordTremor.com Vendor
Joined
May 20, 2021
Messages
782
Reaction Points
1,827
Location
Houston, TX
Hey guys,

If anyone is in the market for these kits, we have both the KD Fabworks brackets and the light bars in stock and ready to ship. The KD Fabworks kits use very clean and only use 4 small holes in the plastic, nothing in the bumper itself.

And. yes, you can run this light bar directly to AUX 5 or AUX 6 with just our upfitter harness. No splicing or relays required.

I run this exact light bar in my ADD Stealth Fighter bumper on my truck and the output is fantastic. Feel free to send me a message if I can help get you setup.
 

CAMO

Tremor Fiend
Joined
Jan 7, 2022
Messages
396
Reaction Points
271
Location
Las Vegas
Military
AF
Current Ride
2015 F-250
I installed mine a couple weeks ago. Got the KDF brackets and some custom mounting bolts separately. The light is TIGHT against the lower grille fascia on the Platinum which I don’t love. But overall killer light bar!
can you provide pictures? Have a platty in shipping and thinking about doing this mod
 
Top