Undercarriage Paint Touch Ups

[tremortime]

What are people using for undercarriage paint touch ups. I saw Rustolium that was flat black with paint and primer mixed. Should I use flat black Rustolium without the primer?

 

[rhines81]

If you really want to fix the undercarriage paint, take that general area down to bare metal and prime it immediately after, then overcoat it once the primer dries with a good flat black acrylic enamel (like rustoleum). If you don't take it down to bare "clean" metal the rust will continue to spread under the paint. Or just keep the undercarriage coated with a good undercoating and don't worry about the dings and scrapes. I like CRC products for that.

 

[Liveinthewoods]

I used this on my 2015 F150 and it worked well.

 

[ICT Tremor]

I plan to do a full three step paint correction, then a ceramic coating, then PPF.

 

[tremortime]

Thanks for the responses. It appears on the rear axle housing and it is minor surface rust but I don’t want it to spread. I’ll steel wool it to get the rust off and spray it with the rustolium primer and paint spray.

 

[JB South Texas]

What are people using for undercarriage paint touch ups. I saw Rustolium that was flat black with paint and primer mixed. Should I use flat black Rustolium without the primer?

I used this product on my travel trailer and I plan on using it on my Tremor. I picked this up in the auto department at Wal-mart. Good Luck! That’s an awesone velocity blue.

 

[tremortime]

I might give that a shot

 

[PapaRaptor]

I might give that a shot

you can use Amsoil for the shocks or anything else underneath that you want to keep the original color ( bolts or nuts.......). It goes on brownish then dries clear with a very slight hue. https://www.amsoil.com/p/heavy-duty...KB8b4xuVYLtUxNmQiOUxVCyAAH5hBIKgaAkYmEALw_wcB