Tremor coils

[m110029]

I have a 23 F350 super cab with a 6.7. I am looking to raise the front about 1.5" using a tremor coil. Is there a tremor coil part number that will achieve the height? I would like to keep some nose rake if possible. I would like to use a spring vs a spacer. I was also thinking to use a track bar to account for the geometry change. I believe there were posts already about this topic but I am new to the forum and may not have the latest info. Really appreciate it.

 

[04sshd]

I have my stock coils available if you want to try them.

 

[Optimus🤖]

@04sshd will send them to you but where is "sJM$277545"?

 

[HeavyAssault]

The most popular Tremor coils will be rated for 5200lbs, that usually leads to a small lift. I'm not 100% certain you would achieve a lift of 1.5" lift. I'd suggest to use the taller Tremor rear block as well to keep the rake ( I prefer a rake look as well). The trac bar is 50/50...you might need it, you might not due to the small amount of change with the front coils.

Here's the part numbers I have for coils. I don't think they have changed for the 2023+ trucks.
LC3C-5310-ATA (LAT)/ Door Spring code 77xx- 5,200
LC3C-5310-ASA (LAS)/ Door Spring code 88xx - 5,600

 

[m110029]

I have my stock coils available if you want to try them.

Thanks for the reply, are they from a 6.7 350? I remember seeing a post with specific spring part numbers. Would you happen to have the tag numbers off of your springs? My location is in southern Maine. Thanks again.

 

[m110029]

The most popular Tremor coils will be rated for 5200lbs, that usually leads to a small lift. I'm not 100% certain you would achieve a lift of 1.5" lift. I'd suggest to use the taller Tremor rear block as well to keep the rake ( I prefer a rake look as well). The trac bar is 50/50...you might need it, you might not due to the small amount of change with the front coils.

Here's the part numbers I have for coils. I don't think they have changed for the 2023+ trucks.
LC3C-5310-ATA (LAT)/ Door Spring code 77xx- 5,200
LC3C-5310-ASA (LAS)/ Door Spring code 88xx - 5,600

Awesome, thank you. For a small lift like I am looking for, are the under coil spacers any good? I guess if you are taking the coil out for either option, would a coil be a better option?

 

[HeavyAssault]

Awesome, thank you. For a small lift like I am looking for, are the under coil spacers any good? I guess if you are taking the coil out for either option, would a coil be a better option?

I'd always suggest using a coil first, then use any other style of lift component to get the lift where you want it. Plenty of Tremor coils pop up on FB Marketplace. You could get a package deal on whatever pull offs someone is selling. I got a bunch of pull off stuff to include coils, rear blocks, and the running boards for a great price.

 

[04sshd]

Thanks for the reply, are they from a 6.7 350? I remember seeing a post with specific spring part numbers. Would you happen to have the tag numbers off of your springs? My location is in southern Maine. Thanks again.

Mine are off of a 2023 F250 6.7 Tremor, I do have the tag numbers on them still. I'll have to look at them. I also have the Tremor rear blocks as well. And I even have a 2.5" readylift level system available. I'm out of Southern Nevada.

 

[m110029]

@04sshd will send them to you but where is "sJM$277545

 

[m110029]

Address: Steve Mongiat
23 Woodland Drive
Waterboro, ME 04087

 

[m110029]

I'd always suggest using a coil first, then use any other style of lift component to get the lift where you want it. Plenty of Tremor coils pop up on FB Marketplace. You could get a package deal on whatever pull offs someone is selling. I got a bunch of pull off stuff to include coils, rear blocks, and the running boards for a great price.

Really appreciate the help. I'll start looking.

 

[quad racer]

I swapped in some tremor springs (LAT) on my 7.3 non tremor f250. I got about 1.5 lift out of it

 

[quad racer]

Bootleg Tremor F250 - Ford Truck Enthusiasts Forums

2017 - 2022 Super Duty - Bootleg Tremor F250 - So in a quest to level and/or possibly lift my truck I acquired a takeoff Tremor suspension. The take off suspension came off a 2024 F250 diesel lariat tremor. My truck is a 2024 F250 7.3 lariat non tremor. I have the 2? rear block with the >10,500...

www.ford-trucks.com

Here is the write up I did on it

 

[m110029]

I found a set of springs on Ebay supposedly from a Tremor. I have asked the question to the seller if this was from a 250 or 350, diesel or gas. No response yet. The spring numbers are, LC3C-5310-ASB. Any ideas what they may be? Appreciate it.

 

[m110029]

I did make a mistake, the seller did provide that they did come off of a 24 Tremor 350 and that they are a 5600 lb. Could they be from a diesel then?

 

[Alpoba]

I did make a mistake, the seller did provide that they did come off of a 24 Tremor 350 and that they are a 5600 lb. Could they be from a diesel then?

Diesel 350, 5600, confirmed from my own rig

 

[Alpoba]

And are you looking for 5200 or 5600 set of them?
Curious what the asking price is on ebay for that set?

 

[shermanator2]

I did make a mistake, the seller did provide that they did come off of a 24 Tremor 350 and that they are a 5600 lb. Could they be from a diesel then?

Yes, diesel, but isn't that what you are looking for? LC3C-5310-ASB is a 5600lb Tremor (diesel) spring. The B at the end does not matter, just a rolling production revision. Same as the LC3C-5310-ASA that Heavy mentions. With Tremors, 250 vs. 350 does not matter, all parts are the same.

Let me add that LC3C-5310-ASB is exactly the part number that is on my very loaded 2024 F-350 6.7 Platinum Tremor.

 

[m110029]

And are you looking for 5200 or 5600 set of them?
Curious what the asking price is on ebay for that set?

Yes, diesel, but isn't that what you are looking for? LC3C-5310-ASB is a 5600lb Tremor (diesel) spring. The B at the end does not matter, just a rolling production revision. Same as the LC3C-5310-ASA that Heavy mentions. With Tremors, 250 vs. 350 does not matter, all parts are the same.

Let me add that LC3C-5310-ASB is exactly the part number that is on my very loaded 2024 F-350 6.7 Platinum Tremor.

Yes, I am looking for the diesel coils. Do you think these coils will give an overall lift increase of about 1-1.5" inch lift?

 

[04sshd]

This is from my 23, F250, 6.7 Diesel.