Tire and Wheel Advice

[Churo10]

Mine is leveled with 37s. Same wheels, same stick out. No rubbing no trimming.
View attachment 3393

 

[stp07030]

Wheels and tires are here....truck is supposed to arrive 6 Dec. I am disappointed that Method does not include black lip bolts with expensive black wheels...I had to 5 of these kits...ridiculous.

 

[stp07030]

Lip Bolt Kit | MRW | Black

Change the look of your Method Race Wheels up with this set of black lip bolts. Each kit contains enough lip bolts for 1 (one) wheel. *NOT FOR BEADLOCK RINGS*

www.methodracewheels.com

 

[JC_Tremor]

Not into a pop of color?

Lip Bolt Kit | MRW | Black

Change the look of your Method Race Wheels up with this set of black lip bolts. Each kit contains enough lip bolts for 1 (one) wheel. *NOT FOR BEADLOCK RINGS*

www.methodracewheels.com

Damn that adds up!

 

[DanMan583]

Wheels and tires are here....truck is supposed to arrive 6 Dec. I am disappointed that Method does not include black lip bolts with expensive black wheels...I had to 5 of these kits...ridiculous.

That was one of the reasons why I went with the 701 HD, plus it was a style that I liked more than any other, and one I hadn’t seen on any other Super Duty.....yet. Lol

 

[stp07030]

Not into a pop of color?





Damn that adds up!

Negative on the the Gold Dots!!

 

[davidb1841]

Hi all,

I am new to super duty and waiting for local dealer to put in an order for a 2021 f350, SRW, 7.3, star white, Tremor. Based on great info from the site I am looking at the following tires and wheels. My question is do you think these will fit the stock set up without any modifications like level kit, blocks, etc.? I am going for the wider tire look without too much sticking out from the fenders. Any advice is much appreciated, thanks.

Tires: nitto-ridge-grappler 35x12.5x18
https://www.discounttire.com/buy-tires/nitto-ridge-grappler

Wheels: method 305 NV HD 18x9, 8-170, +18 offset (HD version 4500lb load capacity)
https://www.discounttire.com/buy-wheels/method-race-wheels-mr305-nv-hd

Stock (285x75x18…..18x9, +40offset) vs upgrade tire wheel offset comparison tool:
https://tiresize.com/wheel-offset-calculator/

Concur with Mountain man....I have a +18 offset and they are perfect...just peak out from stock fenders!

 

[2020larry]

Ok what wheels do y’all think would look best?

 

[DanMan583]

Ok what wheels do y’all think would look best?

The Arsenal would look good. Is your truck silver?

 

[2020larry]

The Arsenal would look good. Is your truck silver?

Yeah

 

[Wrangler98]

I have the exact combination you are looking at w/ +18 offset in stock suspension configuration. Love them! They fit perfect, look & perform great, no trimming, no rubbing.

What size receiver came on your truck? Just ordered my tremor, 8 week build time.

 

[STROKINTREMOR]

Ok what wheels do y’all think would look best?

They would all look good but those
Black rhino ones are ??

 

[2020larry]

So I went with a complete different wheel. Thanks for the input!

 

[Dgs067]

Mine is leveled with 37s. Same wheels, same stick out. No rubbing no trimming.
View attachment 3393

Which level did you end up going with on this?

 

[ftchmup]

Which level did you end up going with on this?

In my Sig...

Rapid Red Tremor
2.5” Carli commuter level.
adjusted air pressures, empty: 50 front, 40 rear.
Method NV 305 HD, 18” x 9. +18
37x12.5x18 Nitto Ridge Grapplers
41 3/8” fenderwell before
43 1/2” fenderwell after.

 

[SKIPGOOD]

Mine is leveled with 37s. Same wheels, same stick out. No rubbing no trimming.
View attachment 3393

What did you use to level your rake..??
Do you think you could utilize 38s and still get no rubbing.... What do you think...??
Thx

 

[flarelate]

I have the exact combination you are looking at w/ +18 offset in stock suspension configuration. Love them! They fit perfect, look & perform great, no trimming, no rubbing.

My stock tires are done at 36K miles and I want to go with this set up. Did you keep the stock spare or upgrade that as well?

 

[Mountain Man]

My stock tires are done at 36K miles and I want to go with this set up. Did you keep the stock spare or upgrade that as well?

I left my stock spare alone. Just make sure it goes on the front axle if you ever need to use it. That way you won’t have two different diameter wheels on the rear spinning the differential at different speeds.