Smartcap question

Ward1066

Tremor Newbie
Joined
Feb 22, 2023
Messages
4
Reaction Points
7
Location
Kansas
Current Ride
2022 ranger tremor
I got a Smartcap installed yesterday and I noticed when I picked it up there was a thin piece of foam in the bed. I was thinking it fell out or something during the installation. When I got home I looked closer and at the front there is a big gap and they used a thick piece of foam to fill. I guess it wasn’t enough to fill the gap so they must have sandwiched another piece but it fell out. My question is there something better they use to seal this front gap other than a piece of thick foam? In the pic you can see the red paint of my cab through the gap.
0216151D-33F8-4C7F-A969-0E855A03B6E6.jpeg
 

Attachments

  • 43AC86E7-6CB7-4E3C-BEB8-36DD454BB6BD.jpeg
    43AC86E7-6CB7-4E3C-BEB8-36DD454BB6BD.jpeg
    553.3 KB · Views: 60
I am in contact with Smartcap and I sent a bunch of photos. I think they are trying to figure it out. This isn't usual from what I hear
 
It looks like the installer put the foam strip on wrong. Pretty sure that it is supposed to go on top of the rail at the front of the bed
 

Latest Discussions

Back
Top