Rigid Lights - Rear Bumper

boukaal

Tremor Member
Joined
Jul 13, 2020
Messages
11
Reaction Points
15
Location
Texas
Current Ride
2020 F250 Lariat Sport Tremor
Has anyone installed the Rigid SR-Q Diffused lights in the bumper for added back-up lighting? If so, can you post pictures?

Wondering how they look and if they provide as much light as the non-diffused version.



1607199338851.png
 

Attachments

  • 750DF404-A0D7-47D6-A496-5FFD7D6C854E.jpeg
    750DF404-A0D7-47D6-A496-5FFD7D6C854E.jpeg
    497 KB · Views: 347
  • 6BE6343E-9928-4F2F-8BAD-385CC4907B43.jpeg
    6BE6343E-9928-4F2F-8BAD-385CC4907B43.jpeg
    280.7 KB · Views: 339
  • 7C9165DA-9106-4DC9-8726-662B6B19E115.jpeg
    7C9165DA-9106-4DC9-8726-662B6B19E115.jpeg
    257.3 KB · Views: 352
  • BFE2D1F1-12D4-4B6E-A292-71DD24C4D784.jpeg
    BFE2D1F1-12D4-4B6E-A292-71DD24C4D784.jpeg
    328.1 KB · Views: 365
  • B14D8A76-C7E0-423A-9423-9A474540103E.jpeg
    B14D8A76-C7E0-423A-9423-9A474540103E.jpeg
    336.9 KB · Views: 381
I went with the Rigid Ignite in a diffused flood pattern and mounted them back above the factory hitch. Only two 1/4 holes to drill in the receiver and they provide plenty of light. No holes to cut in that pretty painted bumper.
E794A478-2EED-487B-965A-9210AED6CF18.jpeg
DFFA722E-4408-43FD-AAA2-2B2547C85EC0.jpeg
 
I went with the Rigid Ignite in a diffused flood pattern and mounted them back above the factory hitch. Only two 1/4 holes to drill in the receiver and they provide plenty of light. No holes to cut in that pretty painted bumper.

Did you tie it in to Reverse or an Upfitter switch?
 
I went with the Rigid Ignite in a diffused flood pattern and mounted them back above the factory hitch. Only two 1/4 holes to drill in the receiver and they provide plenty of light. No holes to cut in that pretty painted bumper.View attachment 10896View attachment 10897
Looks great. Do you have a picture without the lights on? Is the lighting similar to the video from @ftchmup?
 
I tied mine to an upfitter switch since I also use them as chase lights. It has also come in handy backing off tailgators when hauling the truck camper.
I used their switch, it is a 3 position rocker. I have mine come on when in reverse. They can be switched on for loading/chase app, or turned off.
 
That looks sharp! Are the stock rear bumpers made of aluminum too? Or is it steel?
Did not put a magnet to it, but it cut like steel. Mixed up some epoxy, let it set up a bit and ran a nice bead around the holes to seal it up.
 
Any idea if these would also fit in the blank spot below the factory fog light area?
I had some flush mount BD fogs installed there and they are about 5 degrees-outside. Not bad, but more ditch light than fog.
 
Back
Top