Rigger's Rapid Red 2021 Tremor

OK - back from the alignment shop.

When I bought the Carli springs, they shipped with a caster shim that goes under the knuckle castle nut. That shim was installed and is in place. Then, I installed the Carli arms and used the 4-notch spacers. I now have +5.5 degrees of caster.

I spoke with Zach at Top Tier. He said go with it.

What do you guys think?
Any update on the 5.5+ caster? How has the truck been performing at highway speeds. Are you still running factory tires?
 
WRT caster angle; My truck seems to be running and driving fine. I don't like the idea of having some caster developed with the knuckle shims and some with the radius arms, but I don't know why. I don't use the truck a whole lot. Since buying it nearly 2 years ago, I have only put 6,500 miles on it. For now, I guess it's fine.
 
Rigger's wheels and tires notepad:

Stock rims are 18" diam x 8" width with 40mm positive offset.

I'd like 18" diam x 9" wide rims with offset of somewhere between 0mm and 20mm. I like Fuel Covert rims. Bronze? Or black? Undecided.

Not at all sure what tires to get. Gotta spend more time in the wheels and tires thread. Should I go 35's? or 37's? Undecided. Thinking 35 x 1250's.
 
Back
Top