Ricks 2020 6.7 Tremor

RickLB

Tremoraholic
Founding Member
Joined
May 31, 2020
Messages
577
Reaction Points
1,566
Location
South Carolina
Military
Retired Army
Current Ride
2020 F-250 Platinum Tremor
I’ve read some of y’all’s builds figure I throw mine in.
2020 Platinum Star White Metallic

Truck Covers USA American Roll top with Yakima tracks installed. Canister is 8”x8”

Ford Molded splash guards
HC3Z 16A550 CA - Fronts https://parts.ford.com/shop/en/us/a...drw-vehicles-with-wheel-lip-molding-6593747-1

HC3Z 16A550 DA - Rears

Covercraft UVS100 Sun Shade

Builtright Industries bedside rack (installed) and dash mount (shipped)


Bulletproof hitch 6” drop/rise

All windows tinted with 3m 30%. Windshield 70%


 
Last edited:
Here is one side of the Builtright panels and the ARB mounted.

20201029 Updated pics with air line ran to rear of bed and connected to the ARB manifold
1707CF96-2355-47F7-A7F0-92A8C44F874A.jpeg
air line.jpeg


Above and below are the Builtright Ind riser mounts. These give room to mount other items closer to the bed panels
shovel.jpeg
shovel1.jpeg
 
Last edited:
No tank needed. I can install one later but currently for my use I don’t need one!


Interesting, I did not know that ... i was thinking to use for Track Tires when at the track with my car ... how long does it take to fill a tire (approximately).
 
Interesting, I did not know that ... i was thinking to use for Track Tires when at the track with my car ... how long does it take to fill a tire (approximately).

It took about 1.5 minutes to take my friends 37s from 12 to 30 psi that are on his Jeep.
 
I’ve read some of y’all’s builds figure I throw mine in.
2020 Platinum Star White Metallic

Truck Covers USA American Roll top with Yakima tracks installed. Canister is 8”x8”

Ford Molded splash guards
HC3Z 16A550 CA - Fronts https://parts.ford.com/shop/en/us/a...drw-vehicles-with-wheel-lip-molding-6593747-1

HC3Z 16A550 DA - Rears

Covercraft UVS100 Sun Shade

Builtright Industries bedside rack (installed) and dash mount (shipped)


Bulletproof hitch 6” drop/rise

All windows tinted with 3m 30%. Windshield 70%
I have the same truck, different color. I see you went with the Bulletproof 6" drop hitch. How did you decide between 6 or 8 inch drop? My thinking is that if the hitch weight is 500 lbs. or more the truck will drop 1-2" and then the 6" should work for most trailers?
 
@Turnem i went with it after getting measurements for our new trailer. I have an 8 also but had to turn it upside down to work on the new trailer which didn’t allow for the tailgate to go down. On my old trailer the 8 was perfect
 
No pictures yet but like these mats so far


These are different and very sharp, did you end up going with them, any pics?
 

Attachments

  • 59EE70C2-16AD-4BEC-A6AA-249E7A78A538.jpeg
    59EE70C2-16AD-4BEC-A6AA-249E7A78A538.jpeg
    521.9 KB · Views: 162
  • 7A3266CE-8740-42B6-AAD1-0779B1655E77.jpeg
    7A3266CE-8740-42B6-AAD1-0779B1655E77.jpeg
    476.8 KB · Views: 156
  • 81FACB22-80FB-4663-839B-2437D0AF0732.jpeg
    81FACB22-80FB-4663-839B-2437D0AF0732.jpeg
    387 KB · Views: 158
  • C0D8C1D9-4396-4878-A608-A7CF669ACEF6.jpeg
    C0D8C1D9-4396-4878-A608-A7CF669ACEF6.jpeg
    537.6 KB · Views: 163
Got my Tufskinz applied today
0B32458E-05E9-4E1B-BC13-7C05608C2856.jpeg

980670D4-3547-4286-9B49-EB58514376B0.jpeg



 
Last edited:

Latest Discussions

Back
Top