Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Gracias brotherFollow the service schedule in your owners manual. I believe it recommends 30,000 miles between changes. It looks like a simple job, just youtube it. Pretty sure you just drain the bottom filter, while that is draining swap the filter out under the hood and then take the 4 or so screws out holding the filter in under the truck and slap a new filter in. Then you have to purge the air out of the fuel lines by turning the key to "on" not "run" for 30 seconds. Might have to do that 5-10 times. You can hear when it grabs the fuel.
https://www.dieselfiltersonline.com...-6-7l-powerstroke-diesel-fuel-filter-kit.htmlAnybody performed this task themselves?
Dealership quoted be $220. Need it done b4 I hit 20k is what I’m being told.
Man this forum is priceless! Graciashttps://www.dieselfiltersonline.com...-6-7l-powerstroke-diesel-fuel-filter-kit.html
here are your parts and i am doing mine at 15k
Easy to check the fuelwater separator - if you are buying good diesel from a reputable station you won’t see any water. This was a check after 4000 miles no water.Lengthy video on how to change it here:
The oil and filter change for the engine is by far THE EASIEST CHANGE I HAVE EVER DONE. I haven’t done the fuel filters yet, but I did change my water separator drain valve to the one from SPE, so I’m familiar with “dry sumping” is turning the truck on and off a few times to purge the air from the system. Here’s a video from YouTube that does a decent job of explaining how to refill the fuel/water separator.Man this forum is awesome. I just had my first oil change, and they told me at 15k I need to change my fuel filter, and it was $200. So I started my research here. and am thankful.
@Sludgemonkey44 - hey brother how do you like the SPE valve? Are you happy with how it drains? Do you recommend?The oil and filter change for the engine is by far THE EASIEST CHANGE I HAVE EVER DONE. I haven’t done the fuel filters yet, but I did change my water separator drain valve to the one from SPE, so I’m familiar with “dry sumping” is turning the truck on and off a few times to purge the air from the system. Here’s a video from YouTube that does a decent job of explaining how to refill the fuel/water separator.
Well so far I’m pleased with it. It is a slightly different design than the OEM one. It does not have the hole through the middle of it so the liquid drains out the side of the base instead of the middle so it has a bit of a dribble. I must say that when I was draining/removing the factory one, it drained through the middle hole for the most part, but it still dribbled out the side hole as well. I have a large enough catch container and I usually wear a pair of disposable gloves so that isn’t an issue for me, and honestly I don’t see much difference in the overall “drainage footprint” if you will, between the two. The other concern I saw that people had with it was about it being an avenue for outside cold to reach the fuel system with it being billet. I’ve had my truck outside in single digits so far and I’ve never experienced any issues. Haven’t seen negatives yet, but I’m not very concerned with it. So far I’m happy with the performance of it and I find it to be far more sturdy and reliable than the flimsy plastic OEM one. I managed to remove it without breaking it, so I have it in a pouch in the truck as a backup/help another one out someday part. Hope this helps. Let me know if you have any other questions. ???@Sludgemonkey44 - hey brother how do you like the SPE valve? Are you happy with how it drains? Do you recommend?
Just make sure you keep allMan this forum is awesome. I just had my first oil change, and they told me at 15k I need to change my fuel filter, and it was $200. So I started my research here. and am thankful.
I did the bottom and then the top and didn't have any issues when I did mine at 15k miles only primed 5 times and was good to goI work at a Ford dealer and do this to my buddy's 6.7. Never crack both filters at same time. The system will get an air bubble and then you will have to spend 3 hrs trying to start the truck back up. do the bottom one re prime the system by keying on a few times then move to the top one and change it and do same priming procedure.