Rear Work Lights / Back-up Lights

Thought I would post a few pics of a recent project to add Rear work Lights and additional light for backing up. Below are some pictures of the brackets I made that require no drilling on the truck for installation. The brackets (2.5" .25" wall square tube) slide into the side of the receiver tube and tighten up with the internal bolts. I added a square plug cap on the end for appearance. If you decide to do this I have additional caps as I had to buy in a pack of 10. The lights are the RIGID Industries D-SS Series PRO Flood LED Surface Mount and provide more than enough light.
View attachment 19834View attachment 19839View attachment 19840View attachment 19841View attachment 19842
Can you post a pic showing how the back of the truck looks now showing both light?
 
here is my setup, but they are the lights from my sponsor
fcklightbar and are bright and haen't had any issues for the last month and no water in them like some other one but they do the job

but i unscrewed the trox screw and used that to mount the lights and i didn't want to cut the bumper but i may still cut but put the lights on the side of the rear bumper they are flush mount lights
 

Attachments

  • 20210225_154617.jpg
    20210225_154617.jpg
    398.5 KB · Views: 173
  • 20210225_154623.jpg
    20210225_154623.jpg
    373.4 KB · Views: 187
  • 20210225_154640.jpg
    20210225_154640.jpg
    251.2 KB · Views: 182
  • 20210311_185004.jpg
    20210311_185004.jpg
    128.4 KB · Views: 171
  • 20210311_185020.jpg
    20210311_185020.jpg
    191.5 KB · Views: 155
  • 20210311_185040.jpg
    20210311_185040.jpg
    200 KB · Views: 165
Check out Tx Tremor's build and his lights (see pic https://www.fordtremor.com/attachments/tremor-bak-revolver-jpeg.21347/)

Thats what I plan to do once I get my truck. already bought these lights and the wiring harness.

Somewhere on here I think there is a thread that shows exactly how he did it or the shop did not sure, cant seem to find it but I will ha ha
 
Thought I would post a few pics of a recent project to add Rear work Lights and additional light for backing up. Below are some pictures of the brackets I made that require no drilling on the truck for installation. The brackets (2.5" .25" wall square tube) slide into the side of the receiver tube and tighten up with the internal bolts. I added a square plug cap on the end for appearance. If you decide to do this I have additional caps as I had to buy in a pack of 10. The lights are the RIGID Industries D-SS Series PRO Flood LED Surface Mount and provide more than enough light.
View attachment 19834View attachment 19839View attachment 19840View attachment 19841View attachment 19842
That is awesome! Does anyone sell anything close to that since I am qualified to make. That is an awesome set up. Thank Brian
 
Thought I would post a few pics of a recent project to add Rear work Lights and additional light for backing up. Below are some pictures of the brackets I made that require no drilling on the truck for installation. The brackets (2.5" .25" wall square tube) slide into the side of the receiver tube and tighten up with the internal bolts. I added a square plug cap on the end for appearance. If you decide to do this I have additional caps as I had to buy in a pack of 10. The lights are the RIGID Industries D-SS Series PRO Flood LED Surface Mount and provide more than enough light.
View attachment 19834View attachment 19839View attachment 19840View attachment 19841View attachment 19842
Can you post a pic showing how the back of the truck looks now showing both light?
Would you build these and sell?
 
Back
Top