Rear end Squat

tom b

Tremor Buff
Joined
Feb 9, 2020
Messages
95
Reaction Points
158
Location
Maryland & Delaware
Current Ride
20' F-350 6.7 Tremor
For anyone that has bumper pulled a 10-12K trailer how much squat did the truck have. (250 or 350).
Thank You
 
For anyone that has bumper pulled a 10-12K trailer how much squat did the truck have. (250 or 350).
Thank You

It’s approx 10k with around 1200-1400lbs tongue weight. I was very impressed compared to the srw 6.7 f350. The 350 would compress the rear helper and be just off the front of it.
The new truck was just about to touch the rear helper with a good bit at the front. It squat approximately 2.75”
 

Attachments

  • 78A8155E-8113-4CEA-82BE-F162FDF8EF81.jpeg
    78A8155E-8113-4CEA-82BE-F162FDF8EF81.jpeg
    590.5 KB · Views: 234
  • 7380431C-8182-4264-82AA-4DE6028A16EF.jpeg
    7380431C-8182-4264-82AA-4DE6028A16EF.jpeg
    305.2 KB · Views: 234
  • D0BF105E-A716-4A45-A88A-0638C9D8D1A1.jpeg
    D0BF105E-A716-4A45-A88A-0638C9D8D1A1.jpeg
    368.2 KB · Views: 223
Last edited:
I installed these today....you can read my entire post in the "What did you do to your Tremor today" thread
 

Attachments

  • 0421201058.jpg
    0421201058.jpg
    375.5 KB · Views: 187
  • 0421201057b_HDR.jpg
    0421201057b_HDR.jpg
    200.5 KB · Views: 190
  • 0421201057a_HDR.jpg
    0421201057a_HDR.jpg
    458.6 KB · Views: 193
Mine's a 350. I hooked a 12k TT with 1250lb tongue weight to a regular hitch just to see how the truck handled it. Brought it down to level but not nose high. That's a lot of weight hanging off the tail of the truck.
 
That's a lot of weight hanging off the tail of the truck.

That's what HD trucks are for! I do run a weight distributing hitch, the ride and driving compliance is much better.
 
Back
Top