Plugs by rear bumper

Gstock

Tremor Member
Joined
Feb 14, 2021
Messages
10
Reaction Points
18
Location
California
Current Ride
2021 F250 7.3L Tremor
Does anyone know what the 2 two prong plugs are for at the rear bumper? I see the fifth wheel plugs so I know it’s not them hoping it could be up fitter switch harness maybe but can’t find my power probe to check for power (in the middle of moving so everything is scattered) it doesn’t show in the manual at all just curious. I have a reverse camera and sensors so I know it’s not those either. Any help would be great thanks.
 

Attachments

  • E9928E2C-9127-47AD-90C3-9897B00599DA.jpeg
    E9928E2C-9127-47AD-90C3-9897B00599DA.jpeg
    238 KB · Views: 852
  • 908CCA9D-60CE-4ABD-B547-9473D47978FE.jpeg
    908CCA9D-60CE-4ABD-B547-9473D47978FE.jpeg
    209 KB · Views: 142
I wish I could help more - mine are in use, but with my rear winch and where I mounted the controller, I would have to do some disassembly to trace it out. I can see they both join another harness and go up to the bottom of the bed, and then it looks like they head towards the passenger side, but not 100% sure. Maybe someone with more access or a wiring diagram can share more info.

Ed
 
Does anyone know what the 2 two prong plugs are for at the rear bumper? I see the fifth wheel plugs so I know it’s not them hoping it could be up fitter switch harness maybe but can’t find my power probe to check for power (in the middle of moving so everything is scattered) it doesn’t show in the manual at all just curious. I have a reverse camera and sensors so I know it’s not those either. Any help would be great thanks.
Check out this thread about this. This is on the 99 to 16 SD, but it looks like the same wires with different connectors.


 
Last edited:
Mine are in use as well, pretty sure they are for the powered tailgate. I haven't taken the tailgate off in this truck yet to confirm but after the recall and subsequent wiring harness change to the 2020 trucks there are now 4 plugs for the tailgate.
 
Back
Top