Peragon Cover

RCnTexas

RCnTexas

Tremor Fanatic
Joined
Nov 7, 2020
Messages
167
Reaction Points
417
Location
Lago Vista Texas
Current Ride
2020 KR Tremor
New Peragon arrived...first mod!

Install started...
View attachment 9904
20201125_101354.jpg
 
RCnTexas said:
I think you'll be happy with it....
Click to expand...
I think so. I didn’t want the roll up canister or the backflip up against the window. The only drawback I can see is if you load the bed with stuff toward the cab it may not open. I figured that was better than the drawbacks of the others. Plus it seems like a great company.
 
Bronco said:
I think so. I didn’t want the roll up canister or the backflip up against the window. The only drawback I can see is if you load the bed with stuff toward the cab it may not open. I figured that was better than the drawbacks of the others. Plus it seems like a great company.
Click to expand...
That seems to be the only downside I see but I think I can work around it.

The company was great...had a question this morning and they answered the phone asap and were very helpful. I found a small dent on the last panel and they immediately offered a discount or a replacement part. Once I chose discount they made the refund and sent me a shipping notification for touch up paint in the event I needed it at no charge. (There was no paint damage.)

Very impressed with them!
 
Have you looked at the reviews on sites besides their own? Amazon, Real Truck, Etc. There seems to be issues with leaking, the panels not lining up and people are saying you have to take it apart and reinstall when they fall out the rails.

I am trying to decide between this one and the Bak Revolver. I have the Bak Flip on my current truck, but I want one that does not block the rear window when open to carry bikes. I hope it works out, as it looks like a good option on paper.
 
I did look at all reviews...I originally started with the revolver as my choice - but once you start reading reviews on them, (delaminating, people going through 3 of them....etc) I backed off.

I saw a lot of issues with older Peragons - not so much on the newer. I don't see how this can come out of the rails if properly installed - nor what you'd "take apart and reinstall" if it did. My guess is people are not following install directions.

I'll say this - their Peragon's service is amazing - I called them for a quick question and got someone right away. I noticed a small dent on the last panel and called them - apologized profusely and gave options to make it right followed by immediate action.

Regarding leaking - I think expecting any cover other than a 1 piece to be 100% dry will create disappointment.........


Also - not sure what part of Texas you're in, but if your somewhere in central Texas, you're welcome to check mine out!
 
RCnTexas said:
I did look at all reviews...I originally started with the revolver as my choice - but once you start reading reviews on them, (delaminating, people going through 3 of them....etc) I backed off.

I saw a lot of issues with older Peragons - not so much on the newer. I don't see how this can come out of the rails if properly installed - nor what you'd "take apart and reinstall" if it did. My guess is people are not following install directions.

I'll say this - their Peragon's service is amazing - I called them for a quick question and got someone right away. I noticed a small dent on the last panel and called them - apologized profusely and gave options to make it right followed by immediate action.

Regarding leaking - I think expecting any cover other than a 1 piece to be 100% dry will create disappointment.........


Also - not sure what part of Texas you're in, but if your somewhere in central Texas, you're welcome to check mine out!
Click to expand...

Yes, I have also seen the complaints with the Bak Revolver delaminating and the material on the bottom falling off from people who live in Texas, which is what led me to look at Peragon.

I know none of them are 100% leak proof, as I have had many different ones over the years. I am still waiting on my truck to arrive, so I still have time to decide.
 
I’ve had the typical issues with them all, so we’ll see how it goes with the Paragon I ordered. They sent me a free $200 upgrade offer 2 days after I ordered it with that upgrade. Dang it! I sent an email requesting a refund...we’ll see.
 
Tx-Tremor6.7 said:
Yes, I have also seen the complaints with the Bak Revolver delaminating and the material on the bottom falling off from people who live in Texas, which is what led me to look at Peragon.

I know none of them are 100% leak proof, as I have had many different ones over the years. I am still waiting on my truck to arrive, so I still have time to decide.
Click to expand...
What about the Lomax/Weather Tech hardcover? Have you heard feedback or reviews on those Trifold Hardcovers? I've been looking and they say there's no gutter system on these. Also, easy removal for full bed use. Just trying to get the best of all for the money you $pending. Like you said, they're all have some issue
 
Bronco said:
I’ve had the typical issues with them all, so we’ll see how it goes with the Paragon I ordered. They sent me a free $200 upgrade offer 2 days after I ordered it with that upgrade. Dang it! I sent an email requesting a refund...we’ll see.
Click to expand...
Emailed paragon and they credited me the Black Friday sale. Talk about customer service!
 
RCnTexas said:
Just finished install. Install was great and quality seems good. Its a little stiff at the moment but it needs some break in time.View attachment 9915View attachment 9916
Click to expand...
I am trying to decide between the Peragon and the new Bak Revolver X4s cover, how do you like the Peragon now that you have had it for a little time? Any problems come up after use? The only thing I am worried about is how the panels fold into the bed that if I have anything up front in the bed it may prevent the panels from collapsing to open.
 
I like the idea of the Peragon, but it looks like if you plan on getting the BuiltRight bed rack you'd lose the functionality of either the racks closest to the cab (because the cover sweeps past the rack to close) or the ability to fold your tonneau down (because you'd smack it into whatever is on your rack).
 
TxTremor said:
I am trying to decide between the Peragon and the new Bak Revolver X4s cover, how do you like the Peragon now that you have had it for a little time? Any problems come up after use? The only thing I am worried about is how the panels fold into the bed that if I have anything up front in the bed it may prevent the panels from collapsing to open.
Click to expand...

I do like it so far....only down side is as you noted....but I rarely have a lot in the bed.
 
You must log in or register to reply here.

Tremor Forum Fav 👍

Precision Upfit Micro3 ATM ADD-A-Circuit Fuse Tap Link Precision Upfit Micro3 ATM ADD-A-Circuit Fuse Tap Link - Grab one through Amazon!

Tremor Forum Photos

Screenshot_20220205-192535.png
IMG_6924.jpeg
F7C99208-A3DE-4C0E-9431-EC42F2D9A374.jpeg
20241016_141223.jpg
20211027_174101.jpg
ford_tremor_cagle_recreation_Area-min.jpeg
Photo3.jpg
IMG_3551.jpeg
Upfitter Swtich Engine bay connections Large.png
20211027_173206.jpg

Latest Discussions

Back
Top