-
Featured
- #1
Hey all,
Most of you know me here as trmrzla—been on this forum since I got my first Tremor at the end of 2022. Like a lot of you, I’ve spent a lot of time tinkering, upgrading, and figuring out how to make the truck better for how I use it. Over time, I started designing a few parts to solve small frustrations or just clean things up. That eventually turned into a bigger idea, and now… it’s real. I’m excited to introduce Open Trail Creations—a new brand focused on building smart, functional, and clean custom parts for Tremor owners. As an ulterior motive, hopefully this will subdue @Optimus🤖 fascination with beans!
Three products are ready to go. Final designs are done, tested, and I’ve got inventory ready. I just need to finish getting the online store set up to take orders—should be any day now.
Here’s your first look - You saw the teasers this week, I'll get some better pictures in the coming week as well as I get the store up for orders.
Upfitter NO-CRIMP solution: Designed to extend the positive leads in an 'almost' plug-n-play solution. Simply clips onto the side of your existing upfitter box. All are labeled and capped. We will have options, perhaps even a service where you can send in your upfitter box and we will send it back to you ready to go (thanks @thatdood)! More to come:
Upfitter Companion for Ground: Should you find it easier to ground accessories close to the upfitter relay box, here is a complimentary grounding solution:
Both solutions come with the corresponding connectors. We can provide Solider Seal connectors for each or, crimp connectors and the appropriate heat shrink. Your choice.
Last but not least, NOCO plug cover: I installed the Dual NOCO plug for this truck because I needed one plug for the battery charger and another for if and when I needed to plug in the block heater (not very often here in TX). Since the second plug was just sitting there, I felt like it needed a cover to keep most of the elements out. Not IP rated, but gives me a little confidence that I'm protecting the plug, like on a day like today:
I’ll share full product details and pricing when the site is live, and I’ll be giving this forum first dibs before launch goes public. This is just the start—Open Trail Creations is here for the long haul, and I’ve got more in development already. Appreciate all the support and feedback from this community—it’s played a huge role in getting this off the ground.
More to come very soon and thanks for all the support!
— trmrzla (Richard)
Open Trail Creations
Most of you know me here as trmrzla—been on this forum since I got my first Tremor at the end of 2022. Like a lot of you, I’ve spent a lot of time tinkering, upgrading, and figuring out how to make the truck better for how I use it. Over time, I started designing a few parts to solve small frustrations or just clean things up. That eventually turned into a bigger idea, and now… it’s real. I’m excited to introduce Open Trail Creations—a new brand focused on building smart, functional, and clean custom parts for Tremor owners. As an ulterior motive, hopefully this will subdue @Optimus🤖 fascination with beans!
Three products are ready to go. Final designs are done, tested, and I’ve got inventory ready. I just need to finish getting the online store set up to take orders—should be any day now.Here’s your first look - You saw the teasers this week, I'll get some better pictures in the coming week as well as I get the store up for orders.
Upfitter NO-CRIMP solution: Designed to extend the positive leads in an 'almost' plug-n-play solution. Simply clips onto the side of your existing upfitter box. All are labeled and capped. We will have options, perhaps even a service where you can send in your upfitter box and we will send it back to you ready to go (thanks @thatdood)! More to come: Upfitter Companion for Ground: Should you find it easier to ground accessories close to the upfitter relay box, here is a complimentary grounding solution:Both solutions come with the corresponding connectors. We can provide Solider Seal connectors for each or, crimp connectors and the appropriate heat shrink. Your choice.
Last but not least, NOCO plug cover: I installed the Dual NOCO plug for this truck because I needed one plug for the battery charger and another for if and when I needed to plug in the block heater (not very often here in TX). Since the second plug was just sitting there, I felt like it needed a cover to keep most of the elements out. Not IP rated, but gives me a little confidence that I'm protecting the plug, like on a day like today:I’ll share full product details and pricing when the site is live, and I’ll be giving this forum first dibs before launch goes public. This is just the start—Open Trail Creations is here for the long haul, and I’ve got more in development already. Appreciate all the support and feedback from this community—it’s played a huge role in getting this off the ground.
More to come very soon and thanks for all the support!
— trmrzla (Richard)
Open Trail Creations
Last edited:
