Odd noise after lift

Foxfire0616

Tremor Buff
Joined
Apr 14, 2021
Messages
66
Reaction Points
174
Location
Newark,Delaware
Current Ride
2021 F250 Tremor
Question to all...
Just had a lift installed and well seems a problem has already surfaced..Hopefully someone might know before heading to shop again..When getting truck up to about 55mph this drone noise starts and continues till about 60ish mph. Nothing before nothing after those speeds..thinking something might be out of trajectory with angles. It’s not the bigger tire rumble but more like blowing over a jug deep hum ..
Thanks for any input just trying to have an idea before bringing back to shop.
 
So this is something you are hearing and not feeling ?
I would call shop right away- don't go mudding and then call with a problem-
 
I had this on my 2005, the shop did not install the Carrier Bearing Drop Plate, and also installed the rear lift blocks backwards, resulting in the pinion pointing down instead of up towards the transfer case.
 
I had this on my 2005, the shop did not install the Carrier Bearing Drop Plate, and also installed the rear lift blocks backwards, resulting in the pinion pointing down instead of up towards the transfer case.
Lots of people forget to install those. If the angles too steep you’ll get that noise at a certain speed and feel a vibration.
 
Unfortunately I solved the problem by trading the truck in( could not pass the offer) and got a Ram TrX. I guess that’s one way to solve the problem.
 
Unfortunately I solved the problem by trading the truck in( could not pass the offer) and got a Ram TrX. I guess that’s one way to solve the problem.
Interesting “solution”. Good luck with the Ram and to the future new owner of the jacked up Tremor.
 
Back
Top