Most Unique Mod Award

The EPIC Roscoe

Tremor Fanatic
Joined
Oct 10, 2020
Messages
137
Reaction Points
275
Location
Florida
Military
USCG (Ret.)
Current Ride
2021 F250 King Ranch Tremor 7.3L
I bet no one had to mod their driveway so "Godzilla" wouldn’t keep the wife from parking in the garage!? Most unique mod award challenge has been issued. ;)
adb6f031-1c83-4d5d-9d74-4e1c099fa175-jpeg.7954
 

Attachments

  • ADB6F031-1C83-4D5D-9D74-4E1C099FA175.jpeg
    ADB6F031-1C83-4D5D-9D74-4E1C099FA175.jpeg
    344.9 KB · Views: 409
I bet no one had to mod their driveway so "Godzilla" wouldn’t keep the wife from parking in the garage!? Most unique mod award challenge has been issued. ;)
adb6f031-1c83-4d5d-9d74-4e1c099fa175-jpeg.7954

You may be first, but I need to extend my driveway so I don’t have to keep moving every time the wife wants to leave or come home.
 
I have a different issue. Truck doesn’t fit in the garage by literally 3-4 inches tops (length wise)... ideas?
 
You may be first, but I need to extend my driveway so I don’t have to keep moving every time the wife wants to leave or come home.
That would really irritate me
 
I bet no one had to mod their driveway so "Godzilla" wouldn’t keep the wife from parking in the garage!? Most unique mod award challenge has been issued. ;)
adb6f031-1c83-4d5d-9d74-4e1c099fa175-jpeg.7954
I haven’t done it yet, but I will have to put the steering wheel on the right side of the truck because Ford built it with the steering wheel on the wrong side. Hopefully they got the rest of the truck right.
 
Remove drywall and frame in a pocket for your front bumper. You can easily get 3-4” out of this.
If there was nothing behind the wall (like the outdoors) You could bump the wall out say 6 feet by adding a lean-to addition. Having a space that is exactly the length of your vehicle stinks. You have to walk around the truck if you pull in next to a wall. At my last house I had 1/2 inch from the garage door to my tail pipe tip when I pulled in and tapped the bare studs. Dry wall closed that gap. At the current house I’m building a 3 vehicle carport to house vehicles while I figure out a detached garage design. It will look something like this
53D77B73-D088-44ED-A647-022A6A5C5FBE.jpeg
And will fit in this space I made.
4420E063-FF07-49C0-9385-41631213B365.jpeg
But, because of the height of the Tremor, starting to rethink the inside height. It was going to stand on 6X6X8s but may swap them out for the 6X6X10s that was going to cut up for the diagonal supports. Clearing the ceiling by less than a foot is not what I was hoping for. At least this change can be easily made at this stage of construction.
 
I have a different issue. Truck doesn’t fit in the garage by literally 3-4 inches tops (length wise)... ideas?
Bay window type mod to the wall (height width depth to generously accommodate the rear of your truck - since backing in gives you camera and senors) finish with simple shed roof over protruding area - skip actual window but frame and side to match existing garage.
 
Back
Top