Method Size and Offset

MTB JB

Tremor Fan
Joined
Nov 1, 2020
Messages
27
Reaction Points
60
Location
Humboldt County
Current Ride
2020 6.7 Iconic Silver Tremor
First Responder
👍🏻
Looking at picking up some new Methods. I have been looking at the NV’s, Mesh, and Grids. I will most likely run 35’s for the first year but plan to upgrade to 37’s when I pick up my 2.5 Carli kit.

I have been stuck between the 17x8.5 0 offset grid and NV. Or the 18x9 -12 NV or Mesh.

I am looking for folks that are running these sizes and offsets on leveled trucks. If I were to put a 37” tire on a -12 offset wheel after the Carli 2.5 is installed will it rub the body? I know I would be in the clear running 35’s with either option.
Any advice is appreciated! ?
 
I know you mentioned the 2.5 Carli kit but I have the 18x9 -12 NV with 37x13.5x18 Toyo M/T’s and a 4.5/5.5 Carli Pin Top and have no rubbing/trimming
 
Last edited:
0922E8CC-DC91-477F-B1DC-EB519B42C154.jpeg
 

Attachments

  • 15AA145F-7781-4125-B9AA-9243BF8BEFAB.jpeg
    15AA145F-7781-4125-B9AA-9243BF8BEFAB.jpeg
    402.6 KB · Views: 272
I'm running 18x9 -12 with 35x12.50 tires on a readlift 2.5" leveling kit. 37s would require just a tiny amount of plastic trimming. In fact I have rubbed the plastic on the fender offroad with 35s
20200507_175103.jpg
 
I have Method NV HD 17/8.5 w/ 0mm offset on order with 37x12.5 Toyo MT’s on order. Also have the Carli 3.5” backcountry system on order.

It will be the same size lift, wheel size/offset, and tire size as this photo below. Looks fantastic. I would’ve liked to go +18 offset, but they didn’t offer that in a 17” wheel.

E290DB09-D724-414E-828E-07C6BA14BBCD.jpg
 
Last edited by a moderator:
I know you mentioned the 2.5 Carli kit but I have the 18x9 -12 NV with 37x13.5x18 Toyo M/T’s and a 4.5/5.5 Carli Pin Top and have no rubbing/trimming
Where did you order your wheels from? And did they come with black bolts or did you paint the shiny ones?
 
I have Method NV HD 17/8.5 w/ 0mm offset on order with 37x12.5 Toyo MT’s on order. Also have the Carli 3.5” backcountry system on order.

It will be the same size lift, wheel size/offset, and tire size as this photo below. Looks fantastic. I would’ve liked to go +18 offset, but they didn’t offer that in a 17” wheel.
Will 17 fit? 18’s Looks close to the calipers.
 
It looks like you don’t have the center caps which is a good look. Did you paint the exposed Huns black?
20200503_095620.jpg


I run open hubs as I hate the the Method center caps look. I did not paint my hubs as of yet, just running the factory black paint on them.
 

Latest Discussions

Back
Top