Method Size and Offset

[MTB JB]

Looking at picking up some new Methods. I have been looking at the NV’s, Mesh, and Grids. I will most likely run 35’s for the first year but plan to upgrade to 37’s when I pick up my 2.5 Carli kit.

I have been stuck between the 17x8.5 0 offset grid and NV. Or the 18x9 -12 NV or Mesh.

I am looking for folks that are running these sizes and offsets on leveled trucks. If I were to put a 37” tire on a -12 offset wheel after the Carli 2.5 is installed will it rub the body? I know I would be in the clear running 35’s with either option.
Any advice is appreciated! ?

 

[The Snake Pit]

I know you mentioned the 2.5 Carli kit but I have the 18x9 -12 NV with 37x13.5x18 Toyo M/T’s and a 4.5/5.5 Carli Pin Top and have no rubbing/trimming

 

[The Snake Pit]

 

[RaptorTremor]

I'm running 18x9 -12 with 35x12.50 tires on a readlift 2.5" leveling kit. 37s would require just a tiny amount of plastic trimming. In fact I have rubbed the plastic on the fender offroad with 35s

 

[Tremortrix]

I have Method NV HD 17/8.5 w/ 0mm offset on order with 37x12.5 Toyo MT’s on order. Also have the Carli 3.5” backcountry system on order.

It will be the same size lift, wheel size/offset, and tire size as this photo below. Looks fantastic. I would’ve liked to go +18 offset, but they didn’t offer that in a 17” wheel.

 

[LariatSportTremor]

View attachment 10617

where did you buy the 6.7 badge?

 

[The Snake Pit]

where did you buy the 6.7 badge?

2017+ Ford Genuine Parts Super Duty F-250 F-350 F-450 F-550 Custom Painted 6.7 L Powerstroke Diesel Door Badge Set (RH/LH)

Ford Genuine Parts F-250/ F-350/ F-450/ F-550 Custom Painted 6.7L Powerstroke Diesel Badge Set. Custom painted.

oemautoart.com

 

[ChuckD]

I know you mentioned the 2.5 Carli kit but I have the 18x9 -12 NV with 37x13.5x18 Toyo M/T’s and a 4.5/5.5 Carli Pin Top and have no rubbing/trimming

Where did you order your wheels from? And did they come with black bolts or did you paint the shiny ones?

 

[The Snake Pit]

Where did you order your wheels from? And did they come with black bolts or did you paint the shiny ones?

I ordered them from CJC
Method makes a Black bolt kit. That is what I used

 

[TA27]

View attachment 10617

I see you did your Beast up right!!! What is your wheel/tire set up? Did you powder coat the bead lock bolts? Love the front hub locks from Ford Performance ?

 

[AFTRSHK]

OK, what's the scoop on the fog lights...

 

[The Snake Pit]

I see you did your Beast up right!!! What is your wheel/tire set up? Did you powder coat the bead lock bolts? Love the front hub locks from Ford Performance ?

Method NV 18x9 -12
Toyo M/T 37x13.5x18
Method sells black bolts

 

[The Snake Pit]

OK, what's the scoop on the fog lights...

View attachment 12371

Ford Squadron SAE/Pro Fog Pocket Light Kit - Ford 2020-22 F-250/350 Super Duty - Baja Designs - Off-Road LED & Laser Lights | Automotive, Jeep, Truck, UTV, ADV, Dirtbike

Baja Designs offers high performance LED lights and light bars for off road trucks, UTVs, and ATVs. Baja Designs is The Scientists of Lighting, contact us today for more info!

www.bajadesigns.com

 

[Sixgun]

I have Method NV HD 17/8.5 w/ 0mm offset on order with 37x12.5 Toyo MT’s on order. Also have the Carli 3.5” backcountry system on order.

It will be the same size lift, wheel size/offset, and tire size as this photo below. Looks fantastic. I would’ve liked to go +18 offset, but they didn’t offer that in a 17” wheel.

Will 17 fit? 18’s Looks close to the calipers.

 

[Tremortrix]

Will 17 fit? 18’s Looks close to the calipers.

Yep - 17’s are just fine, smallest you can go. I have them installed now with no issue, look great.

 

[JM71]

View attachment 10617

It looks like you don’t have the center caps which is a good look. Did you paint the exposed hubs black?

 

[Driftwood]

It looks like you don’t have the center caps which is a good look. Did you paint the exposed Huns black?

I run open hubs as I hate the the Method center caps look. I did not paint my hubs as of yet, just running the factory black paint on them.

 

[JM71]

View attachment 21533

I run open hubs as I hate the the Method center caps look. I did not paint my hubs as of yet, just running the factory black paint on them.

Wondering about front ones. I see yours still have chrome. Perhaps The Snake Pit is running the Warn locking hubs.

 

[Kirabandit123]

I ordered them from CJC
Method makes a Black bolt kit. That is what I used

Do those wheels and tires sit flush I’m very interested in your set up any additional pictures from rear/front be much appreciated.