Light Bar - Factory grill or Bumper

Someone mounted a cured light bar on top of the front bumper using a modified Zroadz mount. I'm trying to find that thread! I'm thinking about a slim line rigid curved light bar in the same location
 
Someone mounted a cured light bar on top of the front bumper using a modified Zroadz mount. I'm trying to find that thread! I'm thinking about a slim line rigid curved light bar in the same location
BF1B963E-85C6-4E86-B42D-A2A599C47A46.jpeg
508F065C-28F3-41E1-8113-4F1635705F27.jpeg
 
For those that are concerned about drilling a hole in the bumper, a factory replacement bumper cover is only $26. If you decide to remove the light just replace the cover and holes are covered. The mounting bolts that most light bars mount to have changed for the 2020 and the ones that are made for 2020 make the light bar stick out way too far from the grill. It looks bad and affects the front camera view. That’s why I modified the Zroadz brackets to mount as close to the grill as possible.
 
Tire Pros did 2x 30” curved rough country with customs mounts and a trimmed grille.

I was thinking of trying to go this route once I get my truck. If there is any interest when I get the mounts cut on my plasma table I could do a run of them. I don’t think the material cost would be too bad.
 

Attachments

  • 7FED6B98-103A-48DF-A6AC-8F6DAD0FE24A.jpeg
    7FED6B98-103A-48DF-A6AC-8F6DAD0FE24A.jpeg
    248.3 KB · Views: 564
  • 1CF66F30-89AA-4F84-9AE8-7354B65B76DA.jpeg
    1CF66F30-89AA-4F84-9AE8-7354B65B76DA.jpeg
    244.5 KB · Views: 557
Tire Pros did 2x 30” curved rough country with customs mounts and a trimmed grille.

I was thinking of trying to go this route once I get my truck. If there is any interest when I get the mounts cut on my plasma table I could do a run of them. I don’t think the material cost would be too bad.



That looks great
 
Bringing this back to top. I'm looking for a curved 40' or 30' LED bar with high lumins for my 2021 F250 KR Tremor. Probably mounted on the bumper in front of the grill. The smaller the footprint, the better. I've been looking at Rigid (this is what I have on my Raptor)

Rigid 883213 RDS curved series Pro 30" - H3.88, D4.7", L35", 47520 Lumins

Rigid 88431 RDS curved series 40" - H1.91", D5.20", L43.09, 31680 Lumins

Anyone have a bar installed on their 2021 Tremor?
 
I bought a Rigid 50” Pro LED Light bar last Thanksgiving Black Friday deal. It retailed for 1,800$ but snagged it for 1,300$.
I saw a post from someone in Canada on here with a Lariat and it tucks in perfectly. 2 months later my truck arrived and I asked the dealer to install it for me but it didn’t fit the Platinum grill.
I just brought my Beast to get my Carli Pintop suspension and a bunch of other mods done and asked if he could get it to fit. He cut my grill so perfectly and finally got it installed 9 months after I bought it.
It’s guaranteed for life is what I was told t to though retailer that Rigid is best quality light bars. Just so damn expensive. Looks like they are now 2,000$ or more.
3E805AFA-01CC-4491-90E4-EEFDEC7CE97F.png
EDB0AA77-5F92-4E06-B131-507F200B9D34.png
BBE4CAA3-E0F0-48D8-B923-3AB77D60215A.jpeg

 
I bought a Rigid 50” Pro LED Light bar last Thanksgiving Black Friday deal. It retailed for 1,800$ but snagged it for 1,300$.
I saw a post from someone in Canada on here with a Lariat and it tucks in perfectly. 2 months later my truck arrived and I asked the dealer to install it for me but it didn’t fit the Platinum grill.
I just brought my Beast to get my Carli Pintop suspension and a bunch of other mods done and asked if he could get it to fit. He cut my grill so perfectly and finally got it installed 9 months after I bought it.
It’s guaranteed for life is what I was told t to though retailer that Rigid is best quality light bars. Just so damn expensive. Looks like they are now 2,000$ or more. View attachment 32138View attachment 32139View attachment 32140
I didn’t get it in Black though.
 
Back
Top