ForScan Resources

Hi all. I have made a few changes with success. I finally have all the parts for adding a heated steering wheel with the paddle shifters. I did not see on the spreadsheet how to enable that. Is there another process for that? Is the heated steering wheel only software enabled? Even for the ones that come from factory? Or is there a hardware switch or button also?

@ZooDad what part ETN you live in? I am near Knoxville…a little northwest.
 
Hi all. I have made a few changes with success. I finally have all the parts for adding a heated steering wheel with the paddle shifters. I did not see on the spreadsheet how to enable that. Is there another process for that? Is the heated steering wheel only software enabled? Even for the ones that come from factory? Or is there a hardware switch or button also?

@ZooDad what part ETN you live in? I am near Knoxville…a little northwest.
Are you just upgrading from an existing factory heated wheel or trying to add that function at the same time as the paddle shifters?

Regardless, there is no hard switch, it's only software controlled.
 
An old video but I couldn't help but laugh what Colt said at the 4:50 mark in the following video. @TRAMPER has to hear this:

 
@ZooDad do you know which settings to change to enable auto hold?
 
Got invited to come over.
Here are some ForScan resources

2020-23 ForScan AsBuilt Sheet
There are differences between 20/21 - 22 & 23 trucks

ForScan Helping Hands
(Always looking for more)

ForScan Tire Size Calculator

I have been working with ForScan for a while. We can figure most things out that are possible.
I have worked with the ForScan Team on the Super Duty platform.
Hope I can help out

ZooDad
I sm
Looking to install a 58 gallon tank in my 2024 7.3l and can find nothing concrete about getting it programmed right with FORscan, got any updates?
 
I sm
Looking to install a 58 gallon tank in my 2024 7.3l and can find nothing concrete about getting it programmed right with FORscan, got any updates?
DTE is still a work in progress. Do far after the initial value change of made, the DTE has to “learn”. I have several people testing this theory

ZooDad
 
Change to 3 to enable Auto Hold.
Post up how it goes.

ZooDad
That worked. I already had it enabled in the APIM and IPC, but didn’t know what to change in ABS. Thank you!
 
@ZooDad any info on enabling Glare Free lighting and increasing DRL brightness? I’m happy to test these out and anything else.
 
Is the settings for adding temps to gauges the same on a 24 as a 22. I can’t seem to find it for a 24
 
Back
Top