-
Featured
- #161
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I would clear the DTCs and go through 2 or 3 key cycles and see if any remain or come back. I think you will be fine.Can I just clear the DTC’s and keep rolling. Wondering how bad a screwed up and how to fix?
@Avslash here is the advice I provided yesterday:Well, I hooked up for the first time to my 2022 7.3L. and made some changes in plain english mode.
I succeeded in enabling Bambi mode, and getting rid of the double honk on exiting the vehicle when running.
I was not able to get the trans and coolant temp to display digitally above the gauges. Anyone have any pointers regarding those items? The closest listings I could find in plain english were "Engine Coolant Temperature Gauge" and "Transmission Temperature Gauge". I changed both of those setting to "enabled", but nothing changed on the display so I reverted them back to the factory settings.
Any insight would be appreciated.
@TX Crawler Look back at page 7... Posts #124-136. Let me know if you have any questions - would be happy to assist.
@Avslash here is the advice I provided yesterday:
Sorry for the late response. I've been away from my computer. I selected "IPC", went to Address 720-07-01 and changed my second instruction from '0EA0' to '0A50'. Hope that helps!How did you get the readouts above the gauges to work? I went into IPC and enabled both "Engine Temp Gauge" and Transmission Temp Guage" but thatdidn't do it....
ok got it, thanks!@Joe_Lee you only want to change one character in the address (the one indicated by the *)
720-07-01 xxxx xx*x xx--
Changing to a "5" will turn the engine and trans temp digital gages on. If you also change the character prior to that to an "A" you will turn the turbo boost off - this is for gas trucks, diesel should remain with an "E"
Good to know. Thanks!ok got it, thanks!
Thanks @ModmanYour new string will be:
720-07-01 8409 0A50 081E
The last two digits are the checksum. Technically you don't have to change this but you will get a "checksum" error if you don't. It will recalculate for you but some don't like seeing the error.
My as built, via the link and using my vin is:@Joe_Lee you only want to change one character in the address (the one indicated by the *)
720-07-01 xxxx xx*x xx--
Changing to a "5" will turn the engine and trans temp digital gages on.
Edit: changing the character previous to this will have other consequences. For instance if you have an "E" and change to an "A" you will turn off the boost gauge. There are other settings too depending on what features you have on your truck. So, don't use any of the full strings I listed for others above unless they are applicable to your truck as well. Happy to give you the correct new string if you provide your As-Built data...
Hopefully this makes sense - props to @coreyms for pointing this out. After I reread my original post it was assuming features so I updated accordingly.
720-07-01 | 8409 | 0EA0 | 0B75 |
Your new string will be 720-07-01 8401 0E50 0B1DMy as built, via the link and using my vin is:
720-07-01 8401 0EA0 0B6D
Much appreciatedYour new string will be 720-07-01 8401 0E50 0B1D
It will end up looking similar to this for the temps (I stole your pic @Utah Tremor ). I can't speak to the DEF part since I do not have a diesel.
View attachment 39153
After I used the string you provided - which seems to have worked fine - I noticed I had typed in my as built data wrong in my previous reply.Your new string will be 720-07-01 8401 0E50 0B1D
It will end up looking similar to this for the temps (I stole your pic @Utah Tremor ). I can't speak to the DEF part since I do not have a diesel.
View attachment 39153
720-07-01 | 8409 | 0EA0 | 0B75 |