Ford Brake Bulletin

[Yukon Bush Tremor]

Just an FYI.

If you have been following mythread at all you know I picked up my truck Monday but had some brake issues. They seem all squared away now but Ford posted and internal bulletin which a service advisor buddy of mine advised me of today which is as follows.

Hey Dude. So low and behold Ford released a memo on all 2020 F250/F350s on that brake pull today. The memo states:

Some 2020 F-250/F-350 vehicles may require replacement of the front brake caliper. If replacement of a front caliper is required to repair a vehicle for a pullwhile braking or brakes binding concern replace the caliper along with the caliper slides and caliper anchor bracket. For claiming use causal component 2B120 or 2B121 and applicable labor times from Section 02 in the Service Labor Time Standards (SLTS) Manual.

Maybe this can help someone get a fix or answer faster than I Did.

 

[NoRoads]

Just an FYI.

If you have been following mythread at all you know I picked up my truck Monday but had some brake issues. They seem all squared away now but Ford posted and internal bulletin which a service advisor buddy of mine advised me of today which is as follows.

Hey Dude. So low and behold Ford released a memo on all 2020 F250/F350s on that brake pull today. The memo states:

Some 2020 F-250/F-350 vehicles may require replacement of the front brake caliper. If replacement of a front caliper is required to repair a vehicle for a pullwhile braking or brakes binding concern replace the caliper along with the caliper slides and caliper anchor bracket. For claiming use causal component 2B120 or 2B121 and applicable labor times from Section 02 in the Service Labor Time Standards (SLTS) Manual.

Maybe this can help someone get a fix or answer faster than I Did.

Be great if your buddy could get bulletin number and you could post. Thanks

 

[Chris21667]

Following this post because the brakes suck ... And I wonder if this causes failure in my brakes

 

[RaptorTremor]

My truck does this when I brake slightly hard every single time. It pulls hard left. Going to take it in soon, will update.

 

[richtor]

Following this post because the brakes suck ... And I wonder if this causes failure in my brakes

It be nice to get that claim off your insurance.

 

[Chris21667]

It be nice to get that claim off your insurance.

it would be i havent had my truck to test but the abs didnt kick it and thats a problem .... if that is a problem and its not my fault ... i can get the ticket and the claim taken care of but if it not a problem so be it ..... never a use the brakes suck on the truck they need to be upgraded

 

[richtor]

The 1992 mustang lx 5.0 brakes from 60-0 in 145. The 7.3 Tremor is 147. The 6.7 Tremor is the slow one at 163 I believe.

 

[RaptorTremor]

The 1992 mustang lx 5.0 brakes from 60-0 in 145. The 7.3 Tremor is 147. The 6.7 Tremor is the slow one at 163 I believe.

Yikes!

 

[Partsman]

Be great if your buddy could get bulletin number and you could post. Thanks

SSM 49222 is the bulletin number

 

[Warpath]

It be nice to get that claim off your insurance.

Well that's because us 6.7L guys are coming outta hyper space to stop. We do the Kessel run in less than twelve parsecs!

 

[Chris21667]

Well that's because us 6.7L guys are coming outta hyper space to stop. We do the Kessel run in less than twelve parsecs!

THIS YEP !!!!! did it is 10 hahahahaha

 

[cadcam1]

Just an FYI.

If you have been following mythread at all you know I picked up my truck Monday but had some brake issues. They seem all squared away now but Ford posted and internal bulletin which a service advisor buddy of mine advised me of today which is as follows.

Hey Dude. So low and behold Ford released a memo on all 2020 F250/F350s on that brake pull today. The memo states:

Some 2020 F-250/F-350 vehicles may require replacement of the front brake caliper. If replacement of a front caliper is required to repair a vehicle for a pullwhile braking or brakes binding concern replace the caliper along with the caliper slides and caliper anchor bracket. For claiming use causal component 2B120 or 2B121 and applicable labor times from Section 02 in the Service Labor Time Standards (SLTS) Manual.

Maybe this can help someone get a fix or answer faster than I Did.

Thank you for updating

 

[richtor]

Well that's because us 6.7L guys are coming outta hyper space to stop. We do the Kessel run in less than twelve parsecs!

And the extra 700lbs it’s carrying.

 

[Warpath]

And the extra 700lbs it’s carrying.

Thats all the women jumping in the back.

 

[RaptorTremor]

So I went to my dealer today, left with no info and my truck. They are slammed packed and won't even look at my truck until next week. I'll drop it off on Monday so they can look at it and then hopefully order the parts. I hate dealers so much?

 

[PapaRaptor]

Thats all the women jumping in the back.

 

[RaptorTremor]

Got my truck back today after having the calipers replaced. It no longer pulls to the left... now it pulls to the right. FML

 

[Trämör]

Got my truck back today after having the calipers replaced. It no longer pulls to the left... now it pulls to the right. FML

How many miles? Could it still be those duratracs breaking in?

 

[RaptorTremor]

How many miles? Could it still be those duratracs breaking in?

19,000 miles. My truck is leveled with methods and nittos.

 

[Cococounty]

Sounds like you mite have shitty Machanic working on it not bleeding the brakes right or bad proportioning valve