Exhaust Tips

Gasser (7.3L)

Gibson 3.5” Inlet/4” Outlet x 12” Length. I cut off about 6”-7” of pipe before installing. Highly recommend, as it looks 100% factory?



613A84CB-EC93-4EB8-814F-BD8F256FDF1A.jpeg
 

Attachments

  • D12F2E60-8EE6-44C0-A634-C21DCE48536E.jpeg
    D12F2E60-8EE6-44C0-A634-C21DCE48536E.jpeg
    346.2 KB · Views: 333
  • 9E8F2EC4-C36F-47AE-BFBC-410AFCC1DFB0.jpeg
    9E8F2EC4-C36F-47AE-BFBC-410AFCC1DFB0.jpeg
    394.1 KB · Views: 404
  • 12785F15-8BDA-4486-8287-03FE60E0C826.jpeg
    12785F15-8BDA-4486-8287-03FE60E0C826.jpeg
    345.3 KB · Views: 395
Last edited:
How about a oem. Can I just buy the factory black and slip it on, or does it require something special?
 
How about a oem. Can I just buy the factory black and slip it on, or does it require something special?
If you found an OEM one please share. I could not find one from Ford.
 
Certain ones came with a chrome tip from factory on the 7.3. May be king ranch and platinum. I haven’t seen a black from factory. I looked all over and came across the Gibson mentioned by Tremor 76. I haven’t pulled the trigger yet but that’s my favorite so far. I love how long it is and that it looks like what should have come on the truck.
 
Banks makes one that is pretty nice. I put this on my gas exhaust.

 

Attachments

  • 20201024_162131.jpg
    20201024_162131.jpg
    271.1 KB · Views: 453
  • 20200913_170639.jpg
    20200913_170639.jpg
    326.3 KB · Views: 453
  • 20200913_170619.jpg
    20200913_170619.jpg
    244.4 KB · Views: 443
  • 20200913_170626.jpg
    20200913_170626.jpg
    147.6 KB · Views: 438
I installed the MBRP black tip end of December. I cut about 4-5 inches off the stock tip at an angle to closely match the MBRP tip. Love the look, but the finish is already coming off.

 
Gasser (7.3L)

Gibson 3.5” Inlet/4” Outlet x 12” Length. I cut off about 6”-7” of pipe before installing. Highly recommend, as it looks 100% factory?



View attachment 24756
I bought this one as well. I only cut about 4” off and painted the oem pipe with high temp point so you can’t really see the pipe inside of the tip.
 
Back
Top