Exhaust Tips

[Dfresh12]

Anyone bought an exhaust tip black in color? If so what size and brands has anyone bought?
Thanks

 

[DwnSth]

Gas or diesel ?

 

[Tremor76]

Gasser (7.3L)

Gibson 3.5” Inlet/4” Outlet x 12” Length. I cut off about 6”-7” of pipe before installing. Highly recommend, as it looks 100% factory?

3.50" Inlet Gibson Exhaust Tips- Black - Gibson Stainless Exhaust Tip- Black 3.50" Inlet / 4" Outlet

Gibson Stainless Exhaust Tip- Black 3.50" Inlet / 4" Outlet - The Black Exhaust Tip by Gibson Performance take...

www.newlevelmotorsports.com

 

[Dfresh12]

7.3 gas

 

[MPark]

How about a oem. Can I just buy the factory black and slip it on, or does it require something special?

 

[Tremor76]

How about a oem. Can I just buy the factory black and slip it on, or does it require something special?

If you found an OEM one please share. I could not find one from Ford.

 

[WJK1]

Certain ones came with a chrome tip from factory on the 7.3. May be king ranch and platinum. I haven’t seen a black from factory. I looked all over and came across the Gibson mentioned by Tremor 76. I haven’t pulled the trigger yet but that’s my favorite so far. I love how long it is and that it looks like what should have come on the truck.

 

[MichiganBeast]

Banks makes one that is pretty nice. I put this on my gas exhaust.

Performance Exhaust Systems | Headers, Manifolds, Mufflers & Parts

Banks Power is your source for high-performance exhaust systems, exhaust parts, exhaust pipes & tubing, headers, stainless steel exhaust tubing and more. Get the sound you want and the power you need for your diesel or gas vehicle.

www.bankspower.com

 

[STDevil]

I used some Rust Oleum High Temp paint to paint my tip. It's only been a few hundred miles since I applied it, but it looks pretty good still. Might want to give it a shot.

 

[SamuraiJones44]

I used some Rust Oleum High Temp paint to paint my tip. It's only been a few hundred miles since I applied it, but it looks pretty good still. Might want to give it a shot.

Like the red.

 

[SamuraiJones44]

Painted mine with high temp paint.

 

[ibeb]

I installed the MBRP black tip end of December. I cut about 4-5 inches off the stock tip at an angle to closely match the MBRP tip. Love the look, but the finish is already coming off.

Amazon.com: MBRP T5112BLK 10" Black Finish Angled Rolled End Exhaust Tip: Automotive

Buy MBRP T5112BLK 10" Black Finish Angled Rolled End Exhaust Tip: Exhaust Pipes & Tips - Amazon.com ✓ FREE DELIVERY possible on eligible purchases

www.amazon.com

 

[Robert357]

Gasser (7.3L)

Gibson 3.5” Inlet/4” Outlet x 12” Length. I cut off about 6”-7” of pipe before installing. Highly recommend, as it looks 100% factory?

3.50" Inlet Gibson Exhaust Tips- Black - Gibson Stainless Exhaust Tip- Black 3.50" Inlet / 4" Outlet

Gibson Stainless Exhaust Tip- Black 3.50" Inlet / 4" Outlet - The Black Exhaust Tip by Gibson Performance take...

www.newlevelmotorsports.com

View attachment 24756

I bought this one as well. I only cut about 4” off and painted the oem pipe with high temp point so you can’t really see the pipe inside of the tip.

 

[Olam812]

Me too....Gibson tip, 3.5 x 4 x 12. I did not cut pipe, and I painted the pipe black with Rustoleum.

 

[STDevil]

Like the red.

Thanks! It was a lot of work to mask things off, and kind of "high schooly" (as one of my friends ribbed me), but I like it and it's fun to do all of the stuff I could not afford to do in high school...

 

[Kirgan13]

Me too....Gibson tip, 3.5 x 4 x 12. I did not cut pipe, and I painted the pipe black with Rustoleum.View attachment 24784

Looks good bud, I ordered the same one just waiting for it to come in

 

[banthos]

View attachment 24780
Painted mine with high temp paint.

Hey, which paint did you use? I used the rustoleum 2000 degree black paint and it came out lighter than I wanted. From your picture, it looks like a darker black. How's it holding up?

 

[Apparition]

I used some Rust Oleum High Temp paint to paint my tip. It's only been a few hundred miles since I applied it, but it looks pretty good still. Might want to give it a shot.

First time I've seen that. Interesting

 

[Dissident]

https://www.amazon.com/gp/product/B07DHDDT5Y/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Cheap and easy

 

[MacTremor]

View attachment 24780
Painted mine with high temp paint.

I see it’s only been a few months but how is that holding up? Did you use the high temp primer too?