DanMan583
Tremor Fiend
- Joined
- Aug 7, 2020
- Messages
- 446
- Reaction Points
- 945
- Location
- Houston, TX
- Current Ride
- 2020 Tremor XLT 7.3L , Oxford White
I also had the same issue at certain RPM’s , mostly at startup though.It was an easy instal. The only issue I had was clearance from the heat shield on the spare. It would rattle at certain RPMS. I loosened all the clamps and used a motorcycle tie down to pull the tailpipe upwards and away from the heat shield then torqued the clamps.
I just dropped my spare tire, bent back the heat shield then pulled the spare back up and let it put some pressure on the heat shield. Problem solved!