CHSML Camera (brake light camera) use while in motion?

TrailBlazin

Tremor Member
Joined
Oct 19, 2020
Messages
18
Reaction Points
70
Location
DFW, Texas
Current Rides #1
F250 Tremor (7.3L)
Has anyone figured out how to make their 3rd brake light camera work while vehicle is in motion? I would like to be able to check on cargo while driving.
I have Forscan but haven't seen anything that lets you enable that yet.
 
I push the button on the dash and mine works, mine is a 21 if that matters.
yeah same here. I found that if you are using that camera when stopped and then drive off, the cam will shut off once you hit like 5mph. But if you turn it back on while in motion, it stays on indefinitely. I drove for like 45 mins with a bed full of firewood with the camera on, not that I really needed to but I like that you can also see what's going on behind you.
 
yeah same here. I found that if you are using that camera when stopped and then drive off, the cam will shut off once you hit like 5mph. But if you turn it back on while in motion, it stays on indefinitely. I drove for like 45 mins with a bed full of firewood with the camera on, not that I really needed to but I like that you can also see what's going on behind you.
I have a 2021 and this definitely does not work for me. I have tried a bunch of times to get it to come on when driving and it just won't, unless I'm under 6mph.

I have tried pressing the button once, twice, repeatedly, held it down for 10 seconds, etc. Nothing works to turn it on, or leave it on, when driving at normal speeds.

Anyone have anything else figured out here?

Note: I don't have the 360 camera set up, just backup cam and the CHMSL.
 
My camera is still on BO. I have the recall. My service tech says they will swap it out and it still will go bad in a few days and I should wait. However every once and awhile it will go on and stay on even at speeds.
 
I have a 2021 and this definitely does not work for me. I have tried a bunch of times to get it to come on when driving and it just won't, unless I'm under 6mph.

I have tried pressing the button once, twice, repeatedly, held it down for 10 seconds, etc. Nothing works to turn it on, or leave it on, when driving at normal speeds.

Anyone have anything else figured out here?

Note: I don't have the 360 camera set up, just backup cam and the CHMSL.
360 cam here with a 2021

I can use my CHMSL anytime
 
360 cam here with a 2021

I can use my CHMSL anytime
Same. I can also use my trailer rear cam anytime by pressing the camera button a second time. It toggles between the CHMSL cam and the customer placed trailer cam.
 
Back
Top Bottom