Bed Light Addition Issue

[thevol]

Anyone have a wiring diagram for the bed lighting. Of course its the only option my truck didnt have and I am trying to add them. I followed a post on another forum for installing them in a 2017+ but not getting 12V on the connector white wire. The diagram I am looking for is like the following but for a 2020:

It might also be a forscan problem as I am enabling them with 726-46-01. Any help would be appreciated!

 

[Cliff1620]

My Truck didn’t come with them either but I made it simple. You can configure your upfitter switches where #5 and #6 are always hot. So i did that and I used #6. After hooking up to the upfitter switches I ran wires along the frame to the bed. I popped out the plastic caps where the lights should go and wired in the lights I bought on amazon for $26, https://www.amazon.com/gp/product/B07XD1SL19/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Only catch is the lights are plug n play replacements for OEM lights. So I had to cut the plastic clip shroud off exposing the plug leads. I attached terminals to the wires I rand and plugged them onto the leads. Now I can use the lights when the truck is off since it’s always hot. I didn’t want to deal with how to wire the OEM switch in the bed, lights, etc. This was super simple and took me maybe 30 min....

 

[thevol]

Yeah hindsight I might have gone that route but I have already bought all the oem lights, switch, and built the harness. Hopefully I can help someone else when I get it sorted out, got to be something simple from 2019 to 2020.

 

[Cliff1620]

Lol, oh sorry..... I hope someone has the diagram.... GL!