Baja Designs aiming questions

[joshthedoc]

After several months of waiting for these lights to show up I finally got them installed today. This evening I tried them out and I wasn't too happy with where beams were going. Any advice on the best way to aim these lights?

 

[Bryantbjb]

I don’t see anything.

 

[joshthedoc]

I don’t see anything.

I think I fixed it

 

[joshthedoc]

Sorry, I guess I had an issue posting the initial photo.

 

[Briski]

I bought the same ones but haven’t installed them yet.
BTW, best avatar w/ JP.

 

[Dissident]

Ill give you a start

pull up to a wall about 10 15 feet out get 2 pieces of cardboard and some painters tape

turn your headlights off and the aux switch for the lights on put the carboard over one set of the lights and secure with painters tape

aim the amber fogs 1inch below even height on the wall and I angled mine wide ever so slightly (~5 degrees left and right)

aim the white spots High 3inches on the wall dead straight. (use these like extra high beams)

 

[joshthedoc]

Ill give you a start

pull up to a wall about 10 15 feet out get 2 pieces of cardboard and some painters tape

turn your headlights off and the aux switch for the lights on put the carboard over one set of the lights and secure with painters tape

aim the amber fogs 1inch below even height on the wall and I angled mine wide ever so slightly (~5 degrees left and right)

aim the white spots High 3inches on the wall dead straight. (use these like extra high beams)

Thanks Dissident! I am going to try it this weekend