anybody put 17" wheels on a Tremor or Ford SD?

[PapaRaptor]

Long story short:
I put a 2.5" level kit on my 2012 Raptor, bought a set of custom Rotoform Wheels 17" Raptor specific. Got a set of Nittos 12.50 X37 17

They kinda rub when tight turning and the wifey says" no go". I hate to lose money on the tires. so if I can get a set of 17 wheels that would fit my Tremor I could run the 37 x 12.50s and get her a set of 35 x 12.50s for the Raptor.

I am just not sure if 17" wheels would be the way to go or even fit my F350 massive brakes.

 

[20F350]

No they won’t fit...will hit callipers.
Hardly enough room for the 18’s.

 

[bmexline]

You sure? This is a picture from another forum on an F250. Maybe the 350 brake system is larger but I don't think it is. I've always thought they had the same brakes.

 

[Whyte Rhyno]

I think Carli confirmed that 17” wheels fit. Check their website and YouTube videos

 

[20F350]

I'll lokk but my F350 looks alot tighter than that with 18's

And i know 17"'s wouldnt fit on my 2015 F350

 

[20F350]

 

[20F350]

That's how tight the stock 18" wheels are to the caliper on my F350.....pretty snug.

 

[Rich Pune]

I think Carli confirmed that 17” wheels fit. Check their website and YouTube videos

Correct. I’ve been on their site all AM learning about suspension. Here is the link to 17s.

2020 Super Duty R&D

Tremor Update: 09/11/2020 We've now measured a stock Tremor to "confirm" Lift heights. The Factory F350 Tremor and Non Tremor measure as follows: Stock F350 Fender Lip to Floor Left Front: 40 1/4 Right Front: 40 5/8 Left Rear: 43 1/4 Right Rear: 43 3/4 Bump Stop

carlisuspension.com

 

[PapaRaptor]

Correct. I’ve been on their site all AM learning about suspension. Here is the link to 17s.

2020 Super Duty R&D

Tremor Update: 09/11/2020 We've now measured a stock Tremor to "confirm" Lift heights. The Factory F350 Tremor and Non Tremor measure as follows: Stock F350 Fender Lip to Floor Left Front: 40 1/4 Right Front: 40 5/8 Left Rear: 43 1/4 Right Rear: 43 3/4 Bump Stop

carlisuspension.com

so like anything the back space needs to be checked:

" So long as the recommended wheel specifications are followed – 17×9 with 4.75″ – 5.0″ backspace – we appear to be in the clear!"

 

[stufarmer]

You sure? This is a picture from another forum on an F250. Maybe the 350 brake system is larger but I don't think it is. I've always thought they had the same brakes.

View attachment 1158

As far as Black Wheels go .. that is beautiful. It's the Wheel offset thats give it the illusion of a Larger Brake.