-
Featured
- #1
co425
Tremor Fanatic
- Joined
- Oct 10, 2021
- Messages
- 128
- Reaction Points
- 194
- Location
- Nor Cal
- Military
- Army
- Current Ride
- 22 f-250 Tremor
Howdy all. I was doing the SEIC mod on my new 2022 today. The wiring locations are slightly different on a 2022 vs all the info I’ve seen prior. The pass through location under the hood is just under the passenger side cowl.
Before finalizing my wiring I tested for continuity to the kick panel wiring. I confirmed said bundle is the pass through from the passenger kick panel.
The passenger kick panel wiring is longer and in a slightly different location as well.
FYI if you have a heat gun you can heat up the black portion of the bundle and slide off the black glue backed heat shrink. This keeps the wiring the full length. Hope this is helpful to guys with a 2022 doing anything with the pass through.
Before finalizing my wiring I tested for continuity to the kick panel wiring. I confirmed said bundle is the pass through from the passenger kick panel.
The passenger kick panel wiring is longer and in a slightly different location as well.
FYI if you have a heat gun you can heat up the black portion of the bundle and slide off the black glue backed heat shrink. This keeps the wiring the full length. Hope this is helpful to guys with a 2022 doing anything with the pass through.