2021 Tremor New 37x13.5 Fuel Blitz

[JohnnyMods]

Just got my 2021 Tremor out of the shop with a 2.5" leveling kit and 37x13.5s on Fuel rims. Rims have a 20 offset. No rubs and tires are not sticking out at all.

 

[Alpoba]

Can you please share the side view. I wonder how much poke there is with 13.5. I assume fuels are 0 offset?

 

[JohnnyMods]

Can you please share the side view. I wonder how much poke there is with 13.5. I assume fuels are 0 offset?

Will do later tonight. Rims are a 20x9 with a +20 offset

 

[22F250]

Just got my 2021 Tremor out of the shop with a 2.5" leveling kit and 37x13.5s on Fuel rims. Rims have a 20 offset. No rubs and tires are not sticking out at all.

no rub at full compression?

 

[JohnnyMods]

Can you please share the side view. I wonder how much poke there is with 13.5. I assume fuels are 0 offset?

Will do later tonight. Rims are a 20x9 with a +20 offset

 

[JohnnyMods]

Will do later tonight. Rims are a 20x9 with a +20 offset

no rub at full compression?

Turned the wheel lock to lock and using a straight edge it does not appear to be any rub. Not an expert at wheel geometry, I took these pics of the closest possible rubs and there is over 1.5" clearance. With a straight edge it appears the closest the tire will come is 0.5" through full compression. The tire shop manager thought we should test it and might have to trim the tab in the center of the second photo. After we drove it over a few curbs and ramps there were no rub marks on the tab. Hope this helps.

 

[Alpoba]

View attachment 35136

Looks fantastic! I might copy your combo eventually probably the first time i’ve seen 13.5 and not 12.5 with 37s.

 

[22F250]

Turned the wheel lock to lock and using a straight edge it does not appear to be any rub. Not an expert at wheel geometry, I took these pics of the closest possible rubs and there is over 1.5" clearance. With a straight edge it appears the closest the tire will come is 0.5" through full compression. The tire shop manager thought we should test it and might have to trim the tab in the center of the second photo. After we drove it over a few curbs and ramps there were no rub marks on the tab. Hope this helps.

the front is rarely a problem unless the axle is incorrectly moved forward. you're looking pretty good there and it looks like if anything, as you said, you may have to trim the plastic. thanks for this!

 

[Alpoba]

Which leveling kit did you end up with? Did it raise the front exactly 2.5 inches? Thanks again.

 

[JohnnyMods]

Which leveling kit did you end up with? Did it raise the front exactly 2.5 inches? Thanks again.

Ready Lift 2.5”. Yes it raised it 2.5”.