2020 “Tremor” build 6.7 Carli pintop/ 40’s

Zrobech

Tremor Member
2x TOTM Winner
Joined
Mar 19, 2020
Messages
11
Reaction Points
120
Location
New Mexico
Current Ride
2020 Tremor
Here is my 2020 Tremor build. Truck was purchased mid January, build was completed January 28th. Truck was build with 50 miles on the odometer, I have a little over 6,000 on the build so far! Love it!

4.5 inch Carli pin top ( all options)
Full Deaver pack
Radius arms
Carli long travel bags
2 onboard air systems
40/13.50/r17 Toyo M/T
KC m roof rack
Trucks is wrapped with 3M satin black
 

Attachments

  • D508F7DE-96BB-44C0-BD38-A667926E7DFF.jpeg
    D508F7DE-96BB-44C0-BD38-A667926E7DFF.jpeg
    84.6 KB · Views: 1,775
  • 954D0E31-9A16-4619-A8A4-13386C787EE8.jpeg
    954D0E31-9A16-4619-A8A4-13386C787EE8.jpeg
    504.7 KB · Views: 1,585
  • 952F01FC-B420-4F6F-B58B-33DB84D52D8C.jpeg
    952F01FC-B420-4F6F-B58B-33DB84D52D8C.jpeg
    417.1 KB · Views: 1,747
  • A2101485-B92F-43B1-A333-5767D8709616.jpeg
    A2101485-B92F-43B1-A333-5767D8709616.jpeg
    469 KB · Views: 1,795
  • 82D15E73-52DC-444C-B5ED-A168E463B39E.jpeg
    82D15E73-52DC-444C-B5ED-A168E463B39E.jpeg
    429.7 KB · Views: 1,790
  • 1E2BA202-FC05-4623-9CF3-3B970E015F08.jpeg
    1E2BA202-FC05-4623-9CF3-3B970E015F08.jpeg
    438.4 KB · Views: 1,767
  • 5589589C-075A-40C1-9738-CEB34F148AB7.jpeg
    5589589C-075A-40C1-9738-CEB34F148AB7.jpeg
    401.6 KB · Views: 1,667
Here is my 2020 Tremor build. Truck was purchased mid January, build was completed January 28th. Truck was build with 50 miles on the odometer, I have a little over 6,000 on the build so far! Love it!

4.5 inch Carli pin top ( all options)
Full Deaver pack
Radius arms
Carli long travel bags
2 onboard air systems
40/13.50/r17 Toyo M/T
KC m roof rack
Trucks is wrapped with 3M satin black
Sweet build. Welcome to the forum.
 
Here is my 2020 Tremor build. Truck was purchased mid January, build was completed January 28th. Truck was build with 50 miles on the odometer, I have a little over 6,000 on the build so far! Love it!

4.5 inch Carli pin top ( all options)
Full Deaver pack
Radius arms
Carli long travel bags
2 onboard air systems
40/13.50/r17 Toyo M/T
KC m roof rack
Trucks is wrapped with 3M satin black
Damn. That’s rad. Same suspension I’d like to get. But I didn’t think you could cram 40s under and still flex without tearing the fenders off. That thing has to rub like crazy. Right?
 
Damn. That’s rad. Same suspension I’d like to get. But I didn’t think you could cram 40s under and still flex without tearing the fenders off. That thing has to rub like crazy. Right?
Not at all with minor trimming. All about offset! Thank you!
 
Not at all with minor trimming. All about offset! Thank you!
So wheels are 17x9 I take it. What’s the offset or backspacing on those things to make them work? Appreciate the info. Great looking truck.
 
Here is my 2020 Tremor build. Truck was purchased mid January, build was completed January 28th. Truck was build with 50 miles on the odometer, I have a little over 6,000 on the build so far! Love it!

4.5 inch Carli pin top ( all options)
Full Deaver pack
Radius arms
Carli long travel bags
2 onboard air systems
40/13.50/r17 Toyo M/T
KC m roof rack
Trucks is wrapped with 3M satin black
That's my dream build right there! Beautiful rig
 
Here is my 2020 Tremor build. Truck was purchased mid January, build was completed January 28th. Truck was build with 50 miles on the odometer, I have a little over 6,000 on the build so far! Love it!

4.5 inch Carli pin top ( all options)
Full Deaver pack
Radius arms
Carli long travel bags
2 onboard air systems
40/13.50/r17 Toyo M/T
KC m roof rack
Trucks is wrapped with 3M satin black
Dang, that's a AWESOME build!

If you ever look at the forum again, where in New Mexico are you? Oh and like Whyte Rhyno said, what's the width, offset and backspacing of the wheels? And while I'm asking questions, how do you like it after almost a year and a half? Have you done any more mods? Now lets see some more pictures! If you ever look at the forum again that is...
 
Here is my 2020 Tremor build. Truck was purchased mid January, build was completed January 28th. Truck was build with 50 miles on the odometer, I have a little over 6,000 on the build so far! Love it!

4.5 inch Carli pin top ( all options)
Full Deaver pack
Radius arms
Carli long travel bags
2 onboard air systems
40/13.50/r17 Toyo M/T
KC m roof rack
Trucks is wrapped with 3M satin black
Beast!!!
 
The 2nd to last photo, where the tire is rubbing on the fender, you can see it says 40x1350x17 on it. Zoom in.
I assume at some point OP must have went from 38/13.50/18 to 40/13.50/17, because in photo #3 one can clearly see he is on 38s.
 
Last edited:
So wheels are 17x9 I take it. What’s the offset or backspacing on those things to make them work? Appreciate the info. Great looking truck.
Dang, that's a AWESOME build!

If you ever look at the forum again, where in New Mexico are you? Oh and like Whyte Rhyno said, what's the width, offset and backspacing of the wheels? And while I'm asking questions, how do you like it after almost a year and a half? Have you done any more mods? Now lets see some more pictures! If you ever look at the forum again that is...
Those are fuel zephyrs. They only come in two offsets for either 17s or 18s. My guess is OP ran 1 offset, as there isnt much poke even with 13.50s, and yet 1 offset would be enough to clear them with carli radius arms. I’m somewhat surprised 40s fit on a 5.5 lift, but apparently they did without any major cutting or rubbing as OP stated. Personally, i’d be happy with his first setup of 38/13.50/18. Looks beefy as is.
 

Attachments

  • F71C1E0C-6B79-47E2-9006-010E18312543.png
    F71C1E0C-6B79-47E2-9006-010E18312543.png
    208.8 KB · Views: 31
Last edited:
@BLACKCHERRY Have you seen anyone else running 40s on your 5.5 systems? This is a first such setup i’ve seen thus far, did not even think it was possible to be honest without seriously cutting into aluminum.
 
Last edited:
Re-gearing I hope, 38s are a stretch with stock tremor gears. 40s would be a must…
I run 38s.. they still break loose when 2nd hits under full throttle... I would jump to 40s without hesitation with these 3.55.
@BLACKCHERRY Have you seen anyone else running 40s on your 5.5 systems? This is a first such setup i’ve seen thus far, did not even think it was possible to be honest without seriously cutting into aluminum.
Plenty... knowing the trimming I've done for 38s, i am not willing to break out the sawzall but plenty of customers doing it.
 
i am wanting the full carli pintop with long travel airbags to tow my fifth wheel. any input on how the system rides, long term reviews?
 
Back
Top