60” BACK LED BAR WITH SEQUENTIAL TURN SIGNAL

[davidb1841]

Feel better Brother!!

 

[coachhomer]

Thanks Brother. Feeling better and then knocks me on my ass. My next door neighbor has it and was interviewed and put on a list and is being followed up on. He wishes he never went to the hospital to get checked out. Cuomo and his messed policies makes ever one not want to get on that list. I felt like I almost had to go to the Hospital but felt so much better after a 10 hour crash out. Never had a fever but chills, body aches, headaches, and feel so damn weak at times. So do I have it I sure think I do. But not going to make it official and get checked out UNLESS the END is near. I'm feeling so much better than I did before Thanksgiving. Just relapsed I feel. Enjoy Life To Its Fullest And Thank GOD Everyday For What He Has Blessed You With. Tomorrow can change your life so drastically and you won't see it coming. ? ? ? ???

Amen to this. I swear there are different strands. My wife and daughter got it back in June and they had mild symptoms for a day. My two boys and I quarantined with them for two weeks and never got it. I don’t think anyone really knows how this thing works. Praying for quick recovery for you my friend.
C

 

[Iron Man]

Amen to this. I swear there are different strands. My wife and daughter got it back in June and they had mild symptoms for a day. My two boys and I quarantined with them for two weeks and never got it. I don’t think anyone really knows how this thing works. Praying for quick recovery for you my friend.
C

Thank You ? ? ?

 

[Iron Man]

Feel better Brother!!

Thank you ? ? ?

 

[Bones]

@bc_suv @Iron Man thank you for the kind words... I’m not a hero. I’m not in the line of fire - I was collateral damage. I don’t necessarily have patient interaction. I support the hero’s on the front line with the training, gear, supplies and testing that they need to get through this and all other medical procedures they do daily (I’m also their punching bag lately too). I’m the dude in the background keeping it moving as their medical consultant. I don’t want to take a second of their light or recognition - they are rightfully the hero’s. But thank you for those kind works. My job is a thankless one. I’m only remember for the last issue when I couldn’t pull that rabbit from my hat... never remembered for the countless times I did pull that rabbit out.

 

[Wgs4972]

Speedy recovery Iron Man????

 

[LariatSportTremor]

Thanks Brother. Feeling better and then knocks me on my ass. My next door neighbor has it and was interviewed and put on a list and is being followed up on. He wishes he never went to the hospital to get checked out. Cuomo and his messed policies makes ever one not want to get on that list. I felt like I almost had to go to the Hospital but felt so much better after a 10 hour crash out. Never had a fever but chills, body aches, headaches, and feel so damn weak at times. So do I have it I sure think I do. But not going to make it official and get checked out UNLESS the END is near. I'm feeling so much better than I did before Thanksgiving. Just relapsed I feel. Enjoy Life To Its Fullest And Thank GOD Everyday For What He Has Blessed You With. Tomorrow can change your life so drastically and you won't see it coming. ? ? ? ???

Stay Strong Mr. Don!

 

[Sthoms3355]

Hey Iron Man. Get better. Prayers for quick and full recovery. I just got my 2021 on Monday. I was going to get one myself, but now that I have the truck and looking at that area not sure how it would get installed. There is a raised rectangle piece in the middle and another on the right side. Would love to hear if someone has figured out a solution.

 

[BigJack601]

As I’m on the mend and trying to get over this damn bug, I’m trying to order everything under the sun to make my rig as cool as some of yours.
My head is foggy as shit these days but I purchased this bad ass light bar for under the tailgate. I saw someone on the road with one and thought I’d try to find something nice. There are a lot on the market. This one was 140$. I’m always one to get the more expensive items figuring you get what you pay for. But this mid price bar had great reviews and is exactly what I want.
Feeling sick so trying to post this was an effort. I don’t know if I can put up a link or just a pick of the link. Sorry Fellas if I only get the pic to post.
First Flurries of the year for Ling Island NY. I’m actually glad my truck isn’t in just yet as I couldn’t go and pick it up. Feeling sick sucks. I hope you all stay healthy my friends.

60inch Truck Tailgate LED Light Bar with Sequential Turn Signal

60" Truck Tailgate LED Light Bar with NEW Sequential Turn Signal Function! Ultra bright with proven reliability. Full function with Reverse. 3 year warranty. See hot new products from XKGLOW!

store.xkglow.com

I like it...a lot!!!???

 

[FatDog]

Hey, get better bud!!

If you're looking for a rear light bar with tail lights, signal lights and reverse lights, I would suggest looking towards Putco.

The reason I would suggest Putco is because I spoke with them a few weeks about their product. They currently offer an adaptor to make the Blade rear light bar, plug and play. They have one for Ford but....... at this point it doesn't work quite right for some of the Ford trucks. He said they are in final stages of producing a new adaptor that would work and it is supposed to be available in January?

Some of the other brands are probably fine too but, I'm not a big fan of splicing into a new trucks wiring harness??

This is the type of connector they are currently working on,

529004 - Putco Quick Connect Harness for Blade Light Bar Fits Chevy Silverado/Sierra 2007-2018, Dodge Ram 2010-2024,Colorado / Canyon 2015-2022, Nissan Titan 2004-2024 and Jeep Gladiator 2020-2024

Putco Quick Connect Direct Fit Wiring Harness for Blade LED Lights - Part # 529004. Manufactured by Putco, Inc. Des Moines, IA.

www.putco.com

Putco Blade LED Tailgate Light Bar (Vehicle Specific Ordering)

Industry leading tailgate LED light bar. Red, white, amber lights. Waterproof & easy install. Manufactured by Putco. Des Moines, IA.

www.putco.com

 

[Iron Man]

Hey, get better bud!!

If you're looking for a rear light bar with tail lights, signal lights and reverse lights, I would suggest looking towards Putco.

The reason I would suggest Putco is because I spoke with them a few weeks about their product. They currently offer an adaptor to make the Blade rear light bar, plug and play. They have one for Ford but....... at this point it doesn't work quite right for some of the Ford trucks. He said they are in final stages of producing a new adaptor that would work and it is supposed to be available in January?

Some of the other brands are probably fine too but, I'm not a big fan of splicing into a new trucks wiring harness??

This is the type of connector they are currently working on,

529004 - Putco Quick Connect Harness for Blade Light Bar Fits Chevy Silverado/Sierra 2007-2018, Dodge Ram 2010-2024,Colorado / Canyon 2015-2022, Nissan Titan 2004-2024 and Jeep Gladiator 2020-2024

Putco Quick Connect Direct Fit Wiring Harness for Blade LED Lights - Part # 529004. Manufactured by Putco, Inc. Des Moines, IA.

www.putco.com

Putco Blade LED Tailgate Light Bar (Vehicle Specific Ordering)

Industry leading tailgate LED light bar. Red, white, amber lights. Waterproof & easy install. Manufactured by Putco. Des Moines, IA.

www.putco.com

I looked at that one. I like the sequential one better though. I ordered a 2-1 splitter that they offer so you dont have to splice the wires. It plugs into trailer connection. Someone on here asked if it can work on a curved surface and i emailed asking them that and they said NO. I dont have my truck yet and already ordered the lite bar. But i can't see if undre the tail gate is actually flat. Can you look and tell me what you think. Thanks FATDOG ? ? ?

 

[FatDog]

I looked at that one. I like the sequential one better though. I ordered a 2-1 splitter that they offer so you dont have to splice the wires. It plugs into trailer connection. Someone on here asked if it can work on a curved surface and i emailed asking them that and they said NO. I dont have my truck yet and already ordered the lite bar. But i can't see if undre the tail gate is actually flat. Can you look and tell me what you think. Thanks FATDOG ? ? ?

Under the tailgate in that gap is flat. I see what your saying on the "sequential" vs. a "blink". Please post up what you end up doing and the parts. I've been thinking about adding one too, but I don't want to be cutting into wires and splicing.

 

[Iron Man]

Under the tailgate in that gap is flat. I see what your saying on the "sequential" vs. a "blink". Please post up what you end up doing and the parts. I've been thinking about adding one too, but I don't want to be cutting into wires and splicing.

FatDog low and behold it came in today. It was 140$ for the 60” Lite bar with built in error cancelled and 18$ for the splitter. It says add splitter for 18$ when ordering it. I called them before ordering it and asked what I needed. There was an additional 80$ error canceller option. He said the 60” bar is new and comes with the canceller and the 2-1 splitter is so you don’t need to cut the wires. Thus brightened up my day and was a burst of energy in my sick and slagging ass. I think this is the best one in my opinion. It also should brighten up your reverse view with 360 led whit lights. You can see it’s got 2 30” bars and you can see the tape on one side of the bar. It’s 7/8” wide.
Yeah Man. ???????

 

[FatDog]

That's cool!! Well get better and when you do the install post up some more info on this, definitely interested !!

I assume your first post with the link is where you purchased from?

 

[Greg T]

Get Well Buddy

 

[RCnTexas]

It looks like a 4pin splitter? Doesn't that mean it will be visible plugged in to the bumper jack?

How do you get reverse on a 4 pin splitter?

I wish they had a splitter that would tie in to the harness on the other side of the bumper.......

 

[Chris21667]

It looks like a 4pin splitter? Doesn't that mean it will be visible plugged in to the bumper jack?

How do you get reverse on a 4 pin splitter?

I wish they had a splitter that would tie in to the harness on the other side of the bumper.......

is i have one on my f150 and you had to plug into the revevse on my rear tail lights but ... i didn't know that the 7 pin trailer connection has a reverse so you could plug into that wire for that

 

[RCnTexas]

But you'd have to splice, right? Seems to take away from the splitter option that's included. I like the bar, just wish they made something that split behind the bumper without cutting.....

 

[Iron Man]

This is what the plug for the LED LIGHT bar looks like and the splitter.

 

[Hulk65]

I had mine installed directly with the dealer....